AutoCodes – Chevrolet – B1353 Chevrolet

B1353 Chevrolet Code - Passenger Front Airbag Resistance Too High

Quick Answer

When the ignition switch is turned to ON, the Sensing and Diagnostic Module (SDM) will perform turn-on test to diagnose critical malfunctions within SDM itself. Common causes include Faulty Passenger Front Airbag, Passenger Front Airbag harness is open or shorted, Passenger Front Airbag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1353 Chevrolet indicates Passenger Front Airbag Resistance Too High.
Common causes: Common causes include Faulty Passenger Front Airbag, Passenger Front Airbag harness is open or shorted, Passenger Front Airbag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,232

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 26, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1353 Chevrolet Description

When the ignition switch is turned to ON, the Sensing and Diagnostic Module (SDM) will perform turn-on test to diagnose critical malfunctions within SDM itself.
Upon passing these test ignition and deployment loop voltages are measured to ensure that they are within their normal voltage ranges. The SDM monitors the voltages at the driver low and the passenger low to detect shorts to ground or voltage in the deploy loops.
The SDM checks the wiring connection to the passenger airbag module by letting the infinitesimal current flow through the internal circuit and verify the resistance.

OBDII Code B1353 Chevrolet - Passenger Front Airbag Resistance Too High - AutoCodes.com — B1353 Chevrolet Code - Passenger Front Airbag Resistance Too High

What does this mean?

What are the Possible Causes of the DTC B1353 Chevrolet?

Faulty Passenger Front Airbag
Passenger Front Airbag harness is open or shorted
Passenger Front Airbag circuit poor electrical connection

How to Fix the DTC B1353 Chevrolet?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1353 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1353 Chevrolet code?

Need more information on how to fix the B1353 Chevrolet code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1353 Chevrolet code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1353 Chevrolet Code

1. What are the common symptoms of OBDII code B1353 in a Chevrolet related to the passenger front airbag resistance being too high?

The most common symptoms include the airbag warning light illuminating on the dashboard and a message indicating an airbag system fault.

2. What are the potential causes of OBDII code B1353 in a Chevrolet, signaling that the passenger front airbag resistance is too high?

Possible causes include a faulty passenger seat occupancy sensor, loose wiring connections, or a malfunctioning airbag control module.

3. How can I diagnose the issue related to OBDII code B1353 in a Chevrolet with the passenger front airbag resistance too high?

Diagnosis typically involves using a diagnostic scanner to retrieve the specific fault code, inspecting the passenger seat occupancy sensor and its wiring, and testing the airbag system components for proper functionality.

4. Can I still drive my Chevrolet safely with OBDII code B1353 indicating high resistance in the passenger front airbag?

It is not recommended to drive the vehicle with this fault code present, as the passenger front airbag may not deploy in the event of a collision, potentially compromising occupant safety.

5. Is it possible to reset OBDII code B1353 in a Chevrolet without addressing the underlying issue of high resistance in the passenger front airbag?

Resetting the code without fixing the root cause will likely result in the code reappearing once the system detects the same issue, so it is important to diagnose and repair the problem.

6. Are there any DIY repair tips for addressing OBDII code B1353 in a Chevrolet with high resistance in the passenger front airbag?

DIY repair may involve checking and securing wiring connections, inspecting the passenger seat sensor for damage, or replacing the sensor if necessary. However, for more complex issues, professional assistance may be required.

7. How much does it typically cost to repair OBDII code B1353 in a Chevrolet caused by high resistance in the passenger front airbag?

The cost of repair can vary depending on the specific cause of the issue, but it may involve expenses for parts replacement, sensor recalibration, or labor costs for professional diagnosis and repair.

8. Can I clear OBDII code B1353 in a Chevrolet myself after fixing the issue with the passenger front airbag resistance?

Once the underlying problem causing the high resistance in the passenger front airbag is resolved, you can use a diagnostic scanner to clear the fault code and reset the airbag system, ensuring the code does not reappear.

9. Is OBDII code B1353 specific to Chevrolet vehicles, or can it occur in other car brands as well?

While the specific code may vary across different car brands, similar issues related to high resistance in the passenger front airbag can occur in various vehicles equipped with similar airbag systems.

10. How important is it to address OBDII code B1353 promptly in a Chevrolet to ensure the proper functioning of the passenger front airbag system?

It is crucial to address this fault code promptly to maintain the integrity of the passenger front airbag system, as any malfunction could compromise occupant safety in the event of a collision.