B0092 Code - Left Side Restraints Sensor 2
Quick Answer
The Restraints Control Module (RCM) monitors all of Supplemental Restraint System (SRS) device connections. Common causes include Faulty Left Side Restraints Sensor 2, Left Side Restraints Sensor 2 harness is open or shorted, Left Side Restraints Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0092 indicates Left Side Restraints Sensor 2.
- Common causes
- Common causes include Faulty Left Side Restraints Sensor 2, Left Side Restraints Sensor 2 harness is open or shorted, Left Side Restraints Sensor 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0092 Description
What are the Possible Causes of the DTC B0092?
- Faulty Left Side Restraints Sensor 2
- Left Side Restraints Sensor 2 harness is open or shorted
- Left Side Restraints Sensor 2 circuit poor electrical connection
How to Fix the DTC B0092?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0092 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0092 code?
Need more information on how to fix the B0092 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0092 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B0092 Buick — Incorrect PPS Verification Identification
- B0092 Cadillac — Incorrect PPS Verification Identification
- B0092 Chevrolet — Incorrect PPS Verification Identification
- B0092 Ford — Left Side Restraints Sensor 2
- B0092 GMC — Incorrect PPS Verification Identification
- B0092 Infiniti — Rear Side Air Bag Satellite Sensor Left
- B0092 Lincoln — Left Side Restraints Sensor 2
- B0092 Mercury — Left Side Restraints Sensor 2
- B0092 Nissan — Rear Side Air Bag Satellite Sensor Left
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0092 Code
No Frequently Asked Questions about B0092 Code found.
Discuss the causes and fixes for B0092 OBDII Code
Code B0092 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
