U11C0 Code - Implausible Manual Shift Lever Signal Received
Quick Answer
The Diagnostic Trouble Code (DTC) sets whenever the communication data sent over the CAN BUS from the Electric Shift Module (ESM) is missing part of the message, the message is corrupted, or the message is an irrational value. Common causes include Faulty Electric Shift Module (ESM), Electric Shift Module (ESM) harness is open or shorted, Electric Shift Module (ESM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U11C0 indicates Implausible Manual Shift Lever Signal Received.
- Common causes
- Common causes include Faulty Electric Shift Module (ESM), Electric Shift Module (ESM) harness is open or shorted, Electric Shift Module (ESM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U11C0 Description
What are the Possible Causes of the DTC U11C0?
- Faulty Electric Shift Module (ESM)
- Electric Shift Module (ESM) harness is open or shorted
- Electric Shift Module (ESM) circuit poor electrical connection
How to Fix the DTC U11C0?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U11C0 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U11C0 code?
Need more information on how to fix the U11C0 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U11C0 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- U11C0 Chrysler — Implausible Manual Shift Lever Signal Received
- U11C0 Dodge — Implausible Manual Shift Lever Signal Received
- U11C0 Jeep — Implausible Manual Shift Lever Signal Received
- U11C0 RAM — Implausible Manual Shift Lever Signal Received
Frequently Asked Questions about U11C0 Code
1. What are the common symptoms of OBDII code U11C0?
The common symptoms of OBDII code U11C0, Implausible Manual Shift Lever Signal Received, may include difficulty shifting gears, incorrect gear display on the dashboard, and potential transmission issues.
2. What are the possible causes of code U11C0?
Possible causes of code U11C0 include a faulty manual shift lever position sensor, wiring issues in the shift lever circuit, damaged connectors, or a malfunction in the transmission control module.
3. How can I diagnose OBDII code U11C0?
To diagnose code U11C0, start by checking the wiring and connectors related to the manual shift lever position sensor. Inspect for any visible damage, corrosion, or loose connections. Use a scan tool to monitor the sensor's readings and ensure they match the actual gear position.
4. Can a DIYer repair OBDII code U11C0?
While some DIYers may be able to address U11C0 by checking and repairing wiring issues or replacing the manual shift lever position sensor, it is recommended to consult with a professional mechanic for an accurate diagnosis and repair.
5. Is it safe to drive with OBDII code U11C0 present?
It is not recommended to drive with OBDII code U11C0 present, as it can lead to unpredictable shifting behavior and potential transmission problems. It is best to address the underlying issue promptly to avoid further damage.
6. How much does it cost to repair OBDII code U11C0?
The cost to repair OBDII code U11C0 can vary depending on the exact cause of the issue. Repair costs may include replacing the manual shift lever position sensor, repairing wiring or connectors, or addressing issues with the transmission control module.
7. Can resetting the fault codes clear OBDII code U11C0?
Resetting the fault codes may temporarily clear OBDII code U11C0, but if the underlying issue is not addressed, the code is likely to return. It is important to diagnose and repair the root cause of the problem to prevent code recurrence.
8. How long does it take to repair OBDII code U11C0?
The duration of the repair for OBDII code U11C0 can vary depending on the complexity of the issue and the availability of parts. Simple repairs like sensor replacement may take a few hours, while more extensive wiring repairs could take longer.
9. Can extreme weather conditions trigger OBDII code U11C0?
Extreme weather conditions such as intense heat or cold can potentially affect the manual shift lever position sensor or related wiring, leading to issues that trigger OBDII code U11C0. It is essential to ensure proper insulation and protection for these components.
10. Is OBDII code U11C0 a common issue in certain vehicle makes or models?
OBDII code U11C0, Implausible Manual Shift Lever Signal Received, can occur in various vehicle makes and models with manual shift systems. However, some vehicles may have a higher likelihood of experiencing this issue due to specific design or component factors.
Discuss the causes and fixes for U11C0 OBDII Code
Code U11C0 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
