U11C0 Dodge Code - Implausible Manual Shift Lever Signal Received
Quick Answer
The Diagnostic Trouble Code (DTC) sets whenever the communication data sent over the CAN BUS from the Electric Shift Module (ESM) is missing part of the message, the message is corrupted, or the message is an irrational value. Common causes include Faulty Electric Shift Module (ESM), Electric Shift Module (ESM) harness is open or shorted, Electric Shift Module (ESM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U11C0 Dodge indicates Implausible Manual Shift Lever Signal Received.
- Common causes
- Common causes include Faulty Electric Shift Module (ESM), Electric Shift Module (ESM) harness is open or shorted, Electric Shift Module (ESM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U11C0 Dodge Description
What are the Possible Causes of the DTC U11C0 Dodge?
- Faulty Electric Shift Module (ESM)
- Electric Shift Module (ESM) harness is open or shorted
- Electric Shift Module (ESM) circuit poor electrical connection
How to Fix the DTC U11C0 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U11C0 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U11C0 Dodge code?
Need more information on how to fix the U11C0 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U11C0 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U11C0 Dodge Code
1. What are the common symptoms of OBDII code U11C0 in a Dodge vehicle?
The common symptoms of OBDII code U11C0, "Implausible Manual Shift Lever Signal Received," in a Dodge vehicle may include issues with shifting gears, the transmission not engaging properly, or the vehicle going into limp mode.
2. What can cause the OBDII code U11C0 to trigger in a Dodge vehicle?
The OBDII code U11C0 can be triggered in a Dodge vehicle due to a faulty manual shift lever position sensor, wiring issues, a malfunctioning transmission control module (TCM), or a software glitch.
3. How serious is the OBDII code U11C0 in a Dodge vehicle?
The OBDII code U11C0, indicating an implausible manual shift lever signal received, should be addressed promptly to ensure safe and proper operation of the transmission. Ignoring this code can lead to transmission issues and potentially unsafe driving conditions.
4. Can I continue driving my Dodge vehicle with the U11C0 code present?
It is not recommended to continue driving your Dodge vehicle with the U11C0 code present, as it indicates a problem with the manual shift lever signal that could lead to transmission malfunctions or failures. It is best to have the issue diagnosed and repaired as soon as possible.
5. How can I diagnose and repair the OBDII code U11C0 in my Dodge vehicle?
Diagnosing and repairing the OBDII code U11C0 may involve checking the manual shift lever position sensor, inspecting the wiring for damage or loose connections, scanning the TCM for faults, and updating or reprogramming the TCM software if necessary.
6. Is it possible to reset the OBDII code U11C0 in a Dodge vehicle without fixing the underlying issue?
While you can clear the OBDII code U11C0 using a scan tool, the code is likely to return if the underlying issue is not addressed. It is important to diagnose and repair the root cause of the code to prevent further problems.
7. How much does it typically cost to repair the OBDII code U11C0 in a Dodge vehicle?
The cost of repairing the OBDII code U11C0 in a Dodge vehicle can vary depending on the cause of the issue, the parts needed for repair, and labor costs. It is advisable to consult a professional mechanic for an accurate estimate.
8. Can a DIY enthusiast fix the OBDII code U11C0 issue in a Dodge vehicle?
While some DIY enthusiasts may have the skills to diagnose and repair the OBDII code U11C0, it is a complex issue related to the transmission system. It is recommended to seek assistance from a qualified mechanic for proper diagnosis and repair.
9. Will the OBDII code U11C0 cause my Dodge vehicle to fail an emissions test?
The OBDII code U11C0 itself may not cause your Dodge vehicle to fail an emissions test, but it indicates a problem with the transmission system that could lead to performance issues. It is best to address this code before undergoing an emissions test.
10. How can I prevent the OBDII code U11C0 from reoccurring in my Dodge vehicle?
To prevent the OBDII code U11C0 from reoccurring in your Dodge vehicle, it is important to address any underlying issues promptly, perform regular maintenance on the transmission system, and follow the manufacturer's recommended service intervals.
Discuss the causes and fixes for U11C0 Dodge OBDII Code
Code U11C0 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
