AutoCodes – Toyota – U0230 Toyota

U0230 Toyota Code - Lost Communication with Rear Gate Module

Quick Answer

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. Common causes include Faulty Controller Area Network (CAN) Communication System, Faulty Rear Gate Module, Rear Gate Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U0230 Toyota indicates Lost Communication with Rear Gate Module.
Common causes: Common causes include Faulty Controller Area Network (CAN) Communication System, Faulty Rear Gate Module, Rear Gate Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,807

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 28, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U0230 Toyota Description

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. The exchange of operating information and commands among devices is facilitated by pre-programmed information about the required message exchange on the serial data circuits. Communication is carried out using two dedicated wires, known as CAN high and CAN low, with both lines carrying 2.5V when the CAN bus is in idle mode. During the transmission of data bits, the CAN high line increases to 3.75V while the CAN low drops to 1.25V, creating a 2.5V differential between the lines. Since communication relies on a voltage differential between the two bus lines, the CAN bus is NOT sensitive to inductive spikes, electrical fields, or other noise. The Diagnostic Trouble Code (DTC) sets when a periodic message from the Rear Gate Module has not been received.

OBDII Code U0230 Toyota - Lost Communication with Rear Gate Module - AutoCodes.com — U0230 Toyota Code - Lost Communication with Rear Gate Module

What does this mean?

What are the Possible Causes of the DTC U0230 Toyota?

Faulty Controller Area Network (CAN) Communication System
Faulty Rear Gate Module
Rear Gate Module harness is open or shorted
Rear Gate Module circuit poor electrical connection

How to Fix the DTC U0230 Toyota?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When there are problems with the way different systems in a vehicle communicate with each other using a technology called Controller Area Network (CAN) communication, Diagnostic Trouble Codes (DTC) are displayed. These codes can be caused by issues with the main bus or branch of the communication network, or with the Electronic Control Units (ECUs) and sensors that make up the different systems. If you see code for both the CAN communication problems and internal or power source problems at the same time, you should focus on fixing the internal or power source problems first.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U0230 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U0230 Toyota code?

Need more information on how to fix the U0230 Toyota code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U0230 Toyota code diagnosed by a professional: Find a repair shop in your area

Information for Specific Toyota Models

U0230 2013 Toyota RAV4 — Lost Communication with Rear Gate Module
U0230 2014 Toyota RAV4 — Lost Communication with Rear Gate Module
U0230 2015 Toyota RAV4 — Lost Communication with Rear Gate Module
U0230 2016 Toyota RAV4 — Lost Communication with Rear Gate Module
U0230 2017 Toyota RAV4 — Lost Communication with Rear Gate Module
U0230 2018 Toyota RAV4 — Lost Communication with Rear Gate Module

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U0230 Toyota Code

1. What does the OBDII code U0230 mean on a Toyota?

The U0230 code indicates a lost communication with the Rear Gate Module, meaning the vehicle's control modules cannot communicate with the module responsible for the rear gate.

2. What are the common symptoms of code U0230 in a Toyota?

Symptoms may include the rear gate not opening or closing properly, unresponsive power liftgate functions, warning lights on the dashboard, or intermittent functionality of the rear gate system.

3. What causes the U0230 code to be triggered in a Toyota?

Common causes include damaged wiring or connectors, a faulty Rear Gate Module, module software issues, or a problem with the CAN (Controller Area Network) communication system.

4. Can a weak battery cause the U0230 code in a Toyota?

Yes, a weak or failing battery can disrupt communication between modules and potentially trigger the U0230 code.

5. How do I diagnose the U0230 code on a Toyota?

Start by checking the wiring and connectors to the Rear Gate Module, test the module for faults, and inspect the CAN communication lines for continuity or damage.

6. Can I still drive my Toyota with the U0230 code active?

Yes, you can typically still drive the vehicle, but rear gate functions may be limited or non-operational, which could be inconvenient.

7. How can I fix the U0230 code on my Toyota?

Repair or replace damaged wiring or connectors, update or reprogram the Rear Gate Module if necessary, or replace the module if it is found to be defective.

8. Is the U0230 code a common issue in Toyotas?

While not extremely common, this code can occur in models with power liftgates or electronic rear gate systems, especially if there are wiring or module issues.

9. How much does it cost to repair a U0230 code on a Toyota?

Costs can vary widely depending on the issue, ranging from $50-$150 for simple wiring repairs to $500 or more if the Rear Gate Module needs replacement.

10. Can a software update resolve the U0230 code in a Toyota?

In some cases, a software update for the Rear Gate Module or related systems may resolve communication issues and clear the U0230 code.