AutoCodes – Toyota – U0230 2013 Toyota RAV4

U0230 2013 Toyota RAV4 Code - Lost Communication with Rear Gate Module

Quick Answer

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. Common causes include Faulty Controller Area Network (CAN) Communication System, Faulty Rear Gate Module, Rear Gate Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U0230 2013 Toyota RAV4 indicates Lost Communication with Rear Gate Module.
Common causes: Common causes include Faulty Controller Area Network (CAN) Communication System, Faulty Rear Gate Module, Rear Gate Module harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 203

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 28, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U0230 2013 Toyota RAV4 Description

The Controller Area Network (CAN) is a standard bus system in vehicles that enables the connection of automotive devices without the need for a host computer. The exchange of operating information and commands among devices is facilitated by pre-programmed information about the required message exchange on the serial data circuits. Communication is carried out using two dedicated wires, known as CAN high and CAN low, with both lines carrying 2.5V when the CAN bus is in idle mode. During the transmission of data bits, the CAN high line increases to 3.75V while the CAN low drops to 1.25V, creating a 2.5V differential between the lines. Since communication relies on a voltage differential between the two bus lines, the CAN bus is NOT sensitive to inductive spikes, electrical fields, or other noise. The Diagnostic Trouble Code (DTC) sets when a periodic message from the Rear Gate Module has not been received.

OBDII Code U0230 2013 Toyota RAV4 - Lost Communication with Rear Gate Module - AutoCodes.com — U0230 2013 Toyota RAV4 Code - Lost Communication with Rear Gate Module

What does this mean?

What are the Possible Causes of the DTC U0230 2013 Toyota RAV4?

Faulty Controller Area Network (CAN) Communication System
Faulty Rear Gate Module
Rear Gate Module harness is open or shorted
Rear Gate Module circuit poor electrical connection

How to Fix the DTC U0230 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When there are problems with the way different systems in a vehicle communicate with each other using a technology called Controller Area Network (CAN) communication, Diagnostic Trouble Codes (DTC) are displayed. These codes can be caused by issues with the main bus or branch of the communication network, or with the Electronic Control Units (ECUs) and sensors that make up the different systems. If you see code for both the CAN communication problems and internal or power source problems at the same time, you should focus on fixing the internal or power source problems first.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U0230 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U0230 2013 Toyota RAV4 code?

Need more information on how to fix the U0230 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U0230 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U0230 2013 Toyota RAV4 Code

1. What does OBDII code U0230 mean on a 2013 Toyota RAV4?

Code U0230 indicates a loss of communication with the Rear Gate Module, meaning the vehicle's computer cannot communicate with the module that controls the rear liftgate.

2. What are the common symptoms of code U0230 in a 2013 Toyota RAV4?

Symptoms may include the rear liftgate not opening or closing properly, no response from the power liftgate button, or the liftgate opening/closing unexpectedly.

3. What causes code U0230 in a 2013 Toyota RAV4?

The most common causes are wiring issues, a faulty Rear Gate Module, a blown fuse, or problems with the CAN (Controller Area Network) communication system.

4. Can a weak battery cause the U0230 code in a 2013 Toyota RAV4?

Yes, a weak or failing battery can cause communication issues between modules, potentially triggering the U0230 code.

5. How do I diagnose code U0230 on my 2013 Toyota RAV4?

Start by checking the wiring and connectors to the Rear Gate Module for damage or corrosion. Then, test the module's power and ground connections and inspect the CAN network for faults.

6. Can I still use my 2013 Toyota RAV4 with the U0230 code active?

Yes, you can drive the vehicle, but the rear liftgate may not function properly, which could be inconvenient and potentially unsafe depending on the situation.

7. How do I fix code U0230 on a 2013 Toyota RAV4?

Repairs may include fixing damaged wiring or connectors, replacing the Rear Gate Module, or addressing issues in the CAN network. A professional diagnosis is recommended for accurate repairs.

8. What tools are needed to troubleshoot code U0230 on a 2013 Toyota RAV4?

Youâ€™ll need an OBDII scanner with CAN diagnostics, a multimeter, and possibly a wiring diagram for the rear gate system to assist with troubleshooting.

9. How much does it cost to repair code U0230 on a 2013 Toyota RAV4?

The cost varies depending on the issue. Wiring repairs may be inexpensive, while replacing the Rear Gate Module can cost several hundred dollars, including parts and labor.

10. Can clearing the U0230 code fix the issue on a 2013 Toyota RAV4?

Clearing the code may temporarily reset the system, but if the underlying issue is not resolved, the code will likely reappear.