Question

What is code p1621 on my obd 2000 Pontiac Sunfire 2.2l?

Answer 1

Hi there,

This code indicates a possible or likely problem with the computer itself.

CONDITIONS FOR SETTING THE DTC 
The PCM cannot communicate internally.

ACTION TAKEN WHEN THE DTC SETS 

 

• The Malfunction Indicator Lamp (MIL) will illuminate.
• The PCM will attempt to record the operating conditions at the time during which you detect this failure, however, since this is a internal PCM failure, you cannot rely on this information. This information will store in the Freeze Frame and Failure Records buffers.
• A history DTC stores.

CONDITIONS FOR CLEARING THE MIL/DTC 

• The MIL will turn OFF after three consecutive ignition cycles in which the diagnostic runs without a fault.
• A history DTC will clear after 40 consecutive warm-up cycles without a fault.
• The MIL/DTC can be cleared by using the scan tool.

TEST DESCRIPTION 
The numbers below refer to the step numbers on the diagnostic table.

1. The Powertrain On-Board Diagnostic (OBD) System Check prompts you to complete some of the basic checks and to store the Freeze Frame and Failure Records data on the scan tool if applicable. This creates an electronic copy of the data captured when the malfunction occurred. The scan tool stores this data for later reference.
2. Reprogram the replacement PCM and perform the crankshaft position system variation learn procedure.