Question

jai changé mon throttle sur mon nissan altima et il vire a 1500 tours normalement il devrait etre a 1000 tours ??

Answer 1

Hi there,

You have to reprogram the throttle. Here is the procedure. 

Nissan Idle Relearn 1Perform "Accelerator Pedal Released Position Learning". a Make sure that accelerator pedal is fully released. b Turn ignition switch 'ON' and wait at least 2 seconds. c Turn ignition switch 'OFF' wait at least 10 seconds. d Turn ignition switch 'ON' and wait at least 2 seconds. e Turn ignition switch 'OFF' wait at least 10 seconds. 2 Perform "Throttle Valve Closed Position Learning" . a Make sure that accelerator pedal is fully released. b Turn ignition switch 'ON'. c Turn ignition switch 'OFF' wait at least 10 seconds. NoteMake sure that throttle valve moves during above 10 seconds by confirming the operating sound. 3Start engine and warm it up to normal operating temperature. 4Turn ignition switch 'OFF' and wait at least 10 seconds. 5Confirm that accelerator pedal is fully released, turn ignition switch 'ON' and wait 3 seconds. 6Repeat the following procedure quickly five times within 5 seconds. a Fully depress the accelerator pedal. b Fully release the accelerator pedal. 7 Wait 7 seconds, fully depress the accelerator pedal and keep it for approx. 20 seconds until the MIL stops blinking and turned ON. 8Fully release the accelerator pedal within 3 seconds after the MIL goes off.