Question

Pushed reset on trip miles. Reads CAL. Ford 2007 F150. What does that mean?

Answer 1

you have to calibrate it.

you can also look into the owner manual for this.

1. Start the vehicle.

2. To enter the compass calibration

mode, press and hold the button for

greater than eight seconds. The

display will then show CAL in the

display window.

3. Drive the vehicle slowly (less than 3 mph [5 km/h]) in circles until

CAL indicator turns off. As many as 5 complete circles may be required.

4. The compass is now calibrated.

 

Ensure you have no magnetic items hanging from your rear view mirror as this will affect the calibration and can cause it not to calibrate. Also ensure your Compass zone setting is correct.

 

Compass zone adjustment

1. Determine which magnetic zone

you are in for your geographic

location by referring to the zone

map.

2. Turn ignition to the ON position.

3. Start the engine.

4. Press the ODO reset button in

the cluster, hold for six seconds and

release. You will see that ZONE

appears in the instrument cluster

display.

5. Press and release the button until the desired zone number appears.