The code p0741 appears when the tcc line from the pcm dissapears, it could be the pcm the problem?

Question

It's a ford ranger 4.0 2001

Answer 1

P0741 Torque convertor clutch circuit performance or circuit off.

This is from a TCC slippage. If you disconnect the connector and turn the key on this code will set, There are 2 solenoid for this year make and model. a wrong part will set this code. To know if its from the PCM or a TCC use a voltmeter or labscope, or a scan tool that can do Fords key on engine running,You can also perform a resistance test with the TCC disconnected measure the TCC power and TCC signal return, the OHM should be about 8.9 ohms to 16.0 ohms,