P2716 Toyota Code - Pressure Control Solenoid 'D' Electrical
Quick Answer
Shift solenoid valve SLT controls the transmission line pressure for smooth transmission operation based on signals from the throttle position sensor and vehicle speed sensor. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'D' valve (Shift Solenoid Valve SLT). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2716 Toyota indicates Pressure Control Solenoid 'D' Electrical.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'D' valve (Shift Solenoid Valve SLT).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2716 Toyota Description
When an open or short in the shift solenoid valve SLT circuit is detected, the ECM interprets this as a fault. The ECM will turn on the MIL and store the Diagnostic Trouble Code (DTC).
What are the Possible Causes of the DTC P2716 Toyota?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Pressure Control Solenoid 'D' valve (Shift Solenoid Valve SLT)
- Pressure Control Solenoid 'D' valve harness is open or shorted
- Pressure Control Solenoid 'D' valve circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2716 Toyota?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2716 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2716 Toyota code?
Need more information on how to fix the P2716 Toyota code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2716 Toyota code diagnosed by a professional: Find a repair shop in your area
Information for Specific Toyota Models
- P2716 2006 Toyota Camry — Pressure Control Solenoid 'D' Electrical Shift Solenoid Valve SLT
- P2716 2007 Toyota Camry — Pressure Control Solenoid 'D' Electrical Shift Solenoid Valve SLT
- P2716 2008 Toyota Camry — Pressure Control Solenoid 'D' Electrical Shift Solenoid Valve SLT
- P2716 2009 Toyota Camry — Pressure Control Solenoid 'D' Electrical Shift Solenoid Valve SLT
- P2716 2010 Toyota Camry — Pressure Control Solenoid 'D' Electrical Shift Solenoid Valve SLT
- P2716 2011 Toyota Camry — Pressure Control Solenoid 'D' Electrical Shift Solenoid Valve SLT
- P2716 2013 Toyota RAV4 — Pressure Control Solenoid 'D' Electrical
- P2716 2014 Toyota RAV4 — Pressure Control Solenoid 'D' Electrical
- P2716 2015 Toyota RAV4 — Pressure Control Solenoid 'D' Electrical
- P2716 2016 Toyota RAV4 — Pressure Control Solenoid 'D' Electrical
- P2716 2017 Toyota RAV4 — Pressure Control Solenoid 'D' Electrical
- P2716 2018 Toyota RAV4 — Pressure Control Solenoid 'D' Electrical
Frequently Asked Questions about P2716 Toyota Code
1. What are the common symptoms of OBDII code P2716 in a Toyota?
- Common symptoms include harsh shifting, slipping gears, delayed engagement, and the transmission going into limp mode.
2. What does the OBDII code P2716 Toyota indicate?
- The code indicates a malfunction in the Pressure Control Solenoid 'D' electrical circuit in the transmission.
3. What are some possible causes of OBDII code P2716 in a Toyota?
- Possible causes include a faulty pressure control solenoid, damaged wiring or connectors, low transmission fluid level, or internal transmission issues.
4. How can I diagnose the cause of OBDII code P2716 in my Toyota?
- Diagnosis typically involves checking the transmission fluid level and condition, inspecting the wiring and connectors, and testing the pressure control solenoid for proper operation.
5. Can I continue to drive my Toyota with OBDII code P2716 present?
- It is not recommended to continue driving with this code as it can lead to further damage to the transmission. It's best to address the issue promptly.
6. How can I repair OBDII code P2716 in my Toyota?
- Repair options may include replacing the pressure control solenoid, repairing damaged wiring or connectors, ensuring proper transmission fluid levels, or seeking professional help for internal transmission repairs.
7. Is it possible to clear OBDII code P2716 in a Toyota without fixing the underlying issue?
- While clearing the code may temporarily turn off the check engine light, the issue causing the code will persist, leading to potential transmission problems in the future.
8. Are there any preventive maintenance tips to avoid OBDII code P2716 in a Toyota?
- Regularly checking and maintaining proper transmission fluid levels, addressing any leaks promptly, and following the manufacturer's recommended service intervals can help prevent this code.
9. Can a DIY enthusiast repair OBDII code P2716 in a Toyota at home?
- Depending on the cause, some DIY enthusiasts with the necessary tools and skills may be able to address the issue themselves. However, it's important to ensure proper diagnosis and repair procedures are followed.
10. How much does it typically cost to repair OBDII code P2716 in a Toyota?
- The cost of repair can vary depending on the specific cause of the code, parts needed, and labor rates. It's advisable to obtain quotes from reputable mechanics or repair shops for an accurate estimate.
1. What are common symptoms of OBDII code P2716 in a Toyota related to the Pressure Control Solenoid 'D' Electrical?
Common symptoms include harsh shifting, hesitation when accelerating, transmission slipping, and an illuminated check engine light.
2. What are the possible causes of OBDII code P2716 in a Toyota?
Possible causes include a faulty pressure control solenoid 'D', damaged wiring or connectors, low transmission fluid levels, or internal transmission issues.
3. How can I diagnose the root cause of OBDII code P2716 in my Toyota?
Diagnosis typically involves using a scan tool to retrieve the code, checking transmission fluid levels and condition, inspecting wiring and connectors for damage, and testing the pressure control solenoid 'D' for proper operation.
4. Can I continue driving my Toyota with OBDII code P2716 present?
It is not recommended to continue driving the vehicle with this code present as it can lead to further damage to the transmission. Prompt diagnosis and repair are advised.
5. How can I repair OBDII code P2716 in a Toyota related to the Pressure Control Solenoid 'D' Electrical?
Repair may involve replacing the pressure control solenoid 'D', repairing damaged wiring or connectors, performing a transmission fluid flush and refill, or seeking assistance from a professional mechanic.
6. Is it possible to reset OBDII code P2716 in a Toyota without fixing the underlying issue?
Resetting the code without addressing the root cause will only temporarily clear the check engine light. The issue will likely reoccur until the problem is properly diagnosed and repaired.
7. Are there any preventive maintenance tips to avoid OBDII code P2716 in a Toyota?
Regularly checking and maintaining proper transmission fluid levels, addressing any transmission issues promptly, and following the manufacturer's recommended maintenance schedule can help prevent this code from appearing.
8. Can a DIY enthusiast with basic automotive knowledge fix OBDII code P2716 in a Toyota?
While some simple repairs like checking wiring connections can be done by a DIY enthusiast, diagnosing and repairing internal transmission issues related to this code may require specialized tools and expertise best handled by a professional mechanic.
9. How long does it typically take to repair OBDII code P2716 in a Toyota?
The repair time can vary depending on the exact cause of the code and the extent of the repair needed. Simple fixes like replacing a solenoid may take a few hours, while more complex issues could require several days.
10. Will fixing OBDII code P2716 in a Toyota improve the vehicle's performance?
Correcting the issues causing this code can restore smooth shifting, improve acceleration, and prevent further damage to the transmission, ultimately enhancing the overall performance and drivability of the vehicle.
Discuss the causes and fixes for P2716 Toyota OBDII Code
-
I have a 2004 Toy. Matrix XR 1.8L with a code P2716. What do you recommend me?
-
You could start by replacing the transmission fluid and filter. If the problem persist, then you may have to replace the transmission assembly.
-
I already put the transmission treatment "Lucas" and another treatment but I did not change the fluid and the filter because by experience when the car is over 100 K miles and we do not the history of car the car is not recommended to change the fluid? Just, it has a transmission pull when the automatic transmission changes from 2nd to the 3rd gear
-
From my experience is not recommended perform a transmission "Flush" (using machine to change exchange fluid), but a transmission fluid exchange and filter at 100K miles is what the factory recommend for maintenance. I checked a national database of repairs, and changing the transmission fluid and filter is the most common solution for the P2716 code.
-
Thanks for advice. For 2004 Toy. Matrix 1.8L, where is the transmission filter location to replace it, what to do? Thanks
-
please I have a toyota matrix 2006 model and it is idling on low speed. after which I change the engine and oil filter and yet the idling remains. So i scanned my car using Obd2 scanner and it show P2716 vvt solenoid D. My questions are:
(1) Where is the VVt Solenoid located in my Toyota Matrix? whether in the Engine Block or the Gear Transmission Box?
(2) How do I know which solenoid is the VVt Solenoid D when I eventually know where to look out for it?
Thanks I await for your much needed response. -
For your vehicle the P2716 code is for the Shift Solenoid Valve SLT. The Shift Solenoid Valve SLT is Inside transmission oil pan, attached to valve body. You have to remove the valve body to access the Shift Solenoid Valve SLT.
Click here to enlarge image -
Thanks for the information.
Please is Solenoid D the same thing with Shift Solenoid Valve SLT? -
We have a 2007 Toyota Camry, 4 cylindar that is giving a code P2716 "Pressure Control Solenoid 'D' Electrical Shift Solenoid Valve SLT" Is there a simpler name for this sensor? Trying to look it up with full title and cannot find it. MOST IMPORTANTLY, do you have a schematic on where it is located in the vehicle? I really appreciate your help!
-
The only name I know is the "Shift Solenoid Valve SLT" and unfortunately the only image I got is an image that shows where the "Shift Solenoid Valve SLT" is attach to the "Transmission Valve Body" which is inside the transmission. I hope that helps.
Click here to enlarge image -
Thank you so much for your response, the schematic you attached is great help. We appreciate your expertise!
-
Here is what scanner detected on my 2004 Toyota Camry: "Pressure Control Solenoid B Performance Stuck". What's the meaning and how do I differentiate the solenoid B from others solenoids?
-
I have a Toyota corolla 2012 and shows the same code p2716
I replaced the whole valve body and still gears wouldn't shift from second to 3,4,5 gears . It only changes to 1st and 2nd gears ... Can you please advice me on what to do next -
I have a 2011 Toyota with a P2716, C1201 and C 1241. It only has 67000 miles on it.
-
Your 2011 Toyota is showing multiple codes, including P2716 (Pressure Control Solenoid 'D' Electrical), C1201, and C1241, which may be related. Let’s break them down:
Code Breakdown & What They Mean:
-
P2716 – Pressure Control Solenoid 'D' Electrical
- This refers to an issue with a transmission pressure control solenoid, which regulates hydraulic pressure for smooth shifting.
- It may be caused by a faulty solenoid, wiring issue, or a transmission control module (TCM) problem.
-
C1201 – Engine Control System Malfunction
- This is often a side effect of other trouble codes and usually appears when an engine or transmission-related fault is present.
-
C1241 – Low Battery Positive Voltage
- This indicates a possible low battery voltage or charging system issue, which can affect multiple vehicle systems, including ABS and transmission functions.
What You Should Check:
✅ Battery & Charging System – Test the battery and alternator to ensure voltage is stable (should be 12.6V+ when off, 13.8V-14.5V when running). Weak voltage can trigger multiple codes.
✅ Transmission Fluid Level & Condition – Check if the transmission fluid is at the correct level and not burnt or dirty. Contaminated fluid can affect solenoid performance.
✅ Inspect Wiring & Connectors – Look for loose or corroded connections at the pressure control solenoid, battery terminals, and alternator connections.
✅ Clear Codes & Recheck – If voltage and wiring check out, clear the codes with a scan tool and see if they return after driving.
Possible Next Steps:
- If P2716 comes back, you may need to replace the pressure control solenoid inside the transmission valve body.
- If C1241 persists, replacing the battery or checking the alternator may be necessary.
- If the car is shifting harshly or sluggishly, the solenoid issue should be addressed sooner to avoid potential transmission damage.
Since your car has only 67,000 miles, it’s relatively low mileage for a transmission issue, so start by checking the electrical system and fluid condition first.
Let us know what you find!
-
-
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
