P2716 2013 Toyota RAV4 Code - Pressure Control Solenoid 'D' Electrical
Quick Answer
Shift solenoid valve SLT controls the transmission line pressure for smooth transmission operation based on signals from the throttle position sensor and vehicle speed sensor. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'D' valve (Shift Solenoid Valve SLT). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2716 2013 Toyota RAV4 indicates Pressure Control Solenoid 'D' Electrical.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'D' valve (Shift Solenoid Valve SLT).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2716 2013 Toyota RAV4 Description
When an open or short in the shift solenoid valve SLT circuit is detected, the ECM interprets this as a fault. The ECM will turn on the MIL and store the Diagnostic Trouble Code (DTC).
What are the Possible Causes of the DTC P2716 2013 Toyota RAV4?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Pressure Control Solenoid 'D' valve (Shift Solenoid Valve SLT)
- Pressure Control Solenoid 'D' valve harness is open or shorted
- Pressure Control Solenoid 'D' valve circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2716 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2716 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2716 2013 Toyota RAV4 code?
Need more information on how to fix the P2716 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2716 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2716 2013 Toyota RAV4 Code
1. What does the OBDII code P2716 mean on a 2013 Toyota RAV4?
P2716 indicates an electrical issue with the Pressure Control Solenoid 'D,' which helps regulate hydraulic pressure in the transmission.
2. What are the common symptoms of code P2716 in a 2013 Toyota RAV4?
Common symptoms include erratic shifting, transmission slipping, poor acceleration, or the vehicle going into limp mode.
3. What causes the P2716 code to appear in a 2013 Toyota RAV4?
Possible causes include a faulty pressure control solenoid, damaged wiring or connectors, a malfunctioning transmission control module (TCM), or low transmission fluid.
4. Can I drive my 2013 Toyota RAV4 with a P2716 code?
It is not recommended to drive with this code active, as it can lead to further transmission damage and unsafe driving conditions.
5. How do I diagnose the P2716 code in a 2013 Toyota RAV4?
Diagnosis involves checking the transmission fluid level, inspecting the wiring and connectors for damage, testing the solenoid, and scanning the TCM for additional codes.
6. How do I fix the P2716 code on my 2013 Toyota RAV4?
Repairs may include replacing the pressure control solenoid, repairing or replacing damaged wiring, updating or replacing the TCM, or performing a transmission fluid flush.
7. What is the cost to repair the P2716 code in a 2013 Toyota RAV4?
Repair costs vary, but replacing the solenoid typically costs $200–$400, while more extensive repairs like TCM replacement or transmission work can cost significantly more.
8. Can low transmission fluid cause the P2716 code in a 2013 Toyota RAV4?
Yes, low or dirty transmission fluid can affect solenoid operation and trigger the P2716 code.
9. Does the P2716 code always mean the solenoid is bad?
No, the issue could also stem from wiring faults, connector problems, or issues with the TCM.
10. Will clearing the P2716 code fix the problem on my 2013 Toyota RAV4?
Clearing the code may temporarily remove the warning, but the underlying issue must be addressed to prevent the code from returning.
Discuss the causes and fixes for P2716 2013 Toyota RAV4 OBDII Code
Code P2716 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
