P2545 Code - Torque Management Request Input Signal 'A' Range/Performance
Quick Answer
To improve shift feel, the Transmission Control Module (TCM) may request that the Engine Control Module (ECM) reduce engine torque during shift events. Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module (ECM) software update. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2545 indicates Torque Management Request Input Signal 'A' Range/Performance.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module (ECM) software update.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2545 Description
The torque reduction request is sent to the ECM through a communication network called the controller area network (CAN). Two circuits are used to communicate CAN data between the ECM and TCM.
A fault in the CAN will not cause the ECM to set the Diagnostic Trouble Codes (DTC). If a CAN fault occurs, other DTCs will set before this code.
The ECM set the OBDII code when the TCM receives a torque reduction failure message from the ECM.
What are the Possible Causes of the DTC P2545?
- Faulty Engine Control Module (ECM)
- Faulty Transmission Control Module (TCM)
- Engine Control Module (ECM) software update
- Transmission Control Module (TCM) software update
- Engine Control Module (ECM) harness is open or shorted
- Engine Control Module (ECM) circuit poor electrical connection
How to Fix the DTC P2545?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2545 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2545 code?
Need more information on how to fix the P2545 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2545 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P2545 Buick — Torque Management Request Input Signal 'A' Range/Performance
- P2545 Cadillac — Torque Management Request Input Signal 'A' Range/Performance
- P2545 Chevrolet — Torque Management Request Input Signal 'A' Range/Performance
- P2545 Dodge — Torque Management Request Input Signal 'A' Range/Performance
- P2545 Ford — Torque Management Request Input Signal 'A' Range/Performance
- P2545 GMC — Torque Management Request Input Signal 'A' Range/Performance
- P2545 Lincoln — Torque Management Request Input Signal 'A' Range/Performance
- P2545 Mercury — Torque Management Request Input Signal 'A' Range/Performance
- P2545 Pontiac — Torque Management Request Input Signal 'A' Range/Performance
Frequently Asked Questions about P2545 Code
1. What are the common symptoms of OBDII code P2545?
The common symptoms of code P2545 include reduced engine power, rough idling, and potential stalling of the vehicle.
2. What are the possible causes of OBDII code P2545?
Potential causes of code P2545 include a faulty torque management input signal sensor, wiring issues, a defective powertrain control module (PCM), or a software glitch.
3. How is OBDII code P2545 diagnosed?
Diagnosing code P2545 involves using a scan tool to retrieve the code and performing a thorough inspection of the torque management input signal sensor, wiring, and related components.
4. Can OBDII code P2545 be fixed at home?
Simple fixes for code P2545 may include checking and tightening the sensor connections, inspecting the wiring for damage, or resetting the PCM. However, complex issues may require professional diagnosis and repair.
5. What are the repair options for OBDII code P2545?
Repair options for code P2545 include replacing the torque management input signal sensor, repairing any damaged wiring, reprogramming the PCM, or seeking assistance from a qualified mechanic.
6. Is it safe to continue driving with OBDII code P2545 present?
Continuing to drive with code P2545 present is not recommended, as it can lead to further damage to the vehicle and potential safety hazards. It is advised to address the issue promptly.
7. How much does it typically cost to repair OBDII code P2545?
The cost of repairing code P2545 can vary depending on the underlying cause, the extent of the damage, and the labor rates of the repair shop. It is advisable to obtain quotes from different mechanics.
8. Can a faulty torque management input signal sensor cause other issues besides triggering OBDII code P2545?
Yes, a faulty torque management input signal sensor can cause other performance issues such as erratic shifting, reduced fuel efficiency, and overall poor engine performance.
9. Are there any preventive measures to avoid OBDII code P2545?
Regular maintenance, including checking the sensor connections and wiring, can help prevent issues that may trigger OBDII code P2545. Additionally, avoiding rough driving can help prolong the sensor's lifespan.
10. How long does it typically take to repair OBDII code P2545?
The repair time for code P2545 can vary depending on the complexity of the issue and the availability of parts. Simple fixes may take a few hours, while more extensive repairs may require a day or more.
Discuss the causes and fixes for P2545 OBDII Code
Code P2545 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
