AutoCodes – Mercury – P2545 Mercury

P2545 Mercury Code - Torque Management Request Input Signal 'A' Range/Performance

Quick Answer

To improve shift feel, the Transmission Control Module (TCM) may request that the Engine Control Module (ECM) reduce engine torque during shift events. Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module (ECM) software update. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2545 Mercury indicates Torque Management Request Input Signal 'A' Range/Performance.
Common causes: Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module (ECM) software update.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,128

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 17, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2545 Mercury Description

To improve shift feel, the Transmission Control Module (TCM) may request that the Engine Control Module (ECM) reduce engine torque during shift events. When such a request is received, the ECM responds by retarding the base ignition timing and notifying the TCM that the request has succeeded. If the ECM is unable to comply with the request, the ECM sends the TCM a message that the request has failed.
The torque reduction request is sent to the ECM through a communication network called the controller area network (CAN). Two circuits are used to communicate CAN data between the ECM and TCM.
A fault in the CAN will not cause the ECM to set the Diagnostic Trouble Codes (DTC). If a CAN fault occurs, other DTCs will set before this code.
The ECM set the OBDII code when the TCM receives a torque reduction failure message from the ECM.

OBDII Code P2545 Mercury - Torque Management Request Input Signal 'A' Range/Performance - AutoCodes.com — P2545 Mercury Code - Torque Management Request Input Signal 'A' Range/Performance

What does this mean?

What are the Possible Causes of the DTC P2545 Mercury?

Faulty Engine Control Module (ECM)
Faulty Transmission Control Module (TCM)
Engine Control Module (ECM) software update
Transmission Control Module (TCM) software update
Engine Control Module (ECM) harness is open or shorted
Engine Control Module (ECM) circuit poor electrical connection

How to Fix the DTC P2545 Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2545 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2545 Mercury code?

Need more information on how to fix the P2545 Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2545 Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2545 Mercury Code

1. What are the common symptoms of OBDII code P2545 in a Mercury vehicle?

- Common symptoms may include engine hesitation, reduced acceleration, and illuminated check engine light.

2. What can cause the OBDII code P2545 to trigger in a Mercury vehicle?

- The code P2545 is typically triggered by a faulty torque management sensor, wiring issues, or a problem with the powertrain control module (PCM).

3. How can I diagnose the OBDII code P2545 in my Mercury vehicle?

- Diagnosis involves using a scan tool to retrieve the code, checking the torque management sensor, inspecting related wiring, and testing the PCM for proper function.

4. Can I drive my Mercury with the OBDII code P2545?

- It is generally not recommended to drive your vehicle with the code P2545 as it can lead to performance issues and potential damage to the engine.

5. How can I repair the OBDII code P2545 in my Mercury?

- Repair options may include replacing the torque management sensor, repairing or replacing damaged wiring, or reprogramming the PCM to address the issue.

6. Are there any DIY tips to troubleshoot the OBDII code P2545 in a Mercury?

- DIY tips include checking for loose or damaged wiring, ensuring proper sensor connections, and performing a visual inspection for any obvious issues.

7. How much does it typically cost to repair the OBDII code P2545 in a Mercury at a repair shop?

- Repair costs can vary depending on the exact cause of the issue, but they may range from $100 to $300 for parts and labor.

8. Can a mechanic reset the OBDII code P2545 in my Mercury without fixing the underlying issue?

- While a mechanic can clear the code, it is essential to address the root cause of the problem to prevent it from reoccurring.

9. Will the OBDII code P2545 cause my Mercury to fail an emissions test?

- Yes, the code P2545 can cause your vehicle to fail an emissions test due to its impact on engine performance and emissions control systems.

10. How long does it take to repair the OBDII code P2545 in a Mercury?

- The repair time can vary depending on the exact cause of the issue and the availability of parts, but it typically takes a few hours to a day to complete the repair.