AutoCodes – Generic – P251F

P251F Code - Power Take-Off Engine Shutdown Control Circuit High Voltage

Quick Answer

The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. Common causes include Faulty Power Take-Off (PTO) Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P251F indicates Power Take-Off Engine Shutdown Control Circuit High Voltage.
Common causes: Common causes include Faulty Power Take-Off (PTO) Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,213

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 21, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P251F Description

The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. The PTO system specifically controls engine speed to values higher than normal base idle, PTO load relay engagement, and remote starting and shutdown of the engine. When the operator requests PTO using either the PTO switch or PTO remote, the engine RPM will increase to a default standby speed. The Engine Control Module (ECM) converts the data from the engine speed sensor to a 2 pulses/engine revolution signal. When PTO is engaged, the power take-off control module sends a serial data message to the ECM requesting engine speeds, in response to signals from the PTO switch or remote.
The Diagnostic Trouble Code (DTC) will be set when the Power Take-Off Control Module detects a fault on the PTO engine shutdown control circuit that is above or below a predetermined voltage threshold.

OBDII Code P251F - Power Take-Off Engine Shutdown Control Circuit High Voltage - AutoCodes.com — P251F Code - Power Take-Off Engine Shutdown Control Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P251F?

Faulty Power Take-Off (PTO) Control Module
Power Take-Off Control Module harness is open or shorted
Power Take-Off Control Module circuit poor electrical connection

How to Fix the DTC P251F?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P251F code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P251F code?

Need more information on how to fix the P251F code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P251F code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P251F Buick — Power Take-Off Engine Shutdown Control Circuit High Voltage
P251F Cadillac — Power Take-Off Engine Shutdown Control Circuit High Voltage
P251F Chevrolet — Power Take-Off Engine Shutdown Control Circuit High Voltage
P251F Ford — Power Take-Off Engine Shutdown Control Circuit High Voltage
P251F GMC — Power Take-Off Engine Shutdown Control Circuit High Voltage

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.