AutoCodes – Buick – P251F Buick

P251F Buick Code - Power Take-Off Engine Shutdown Control Circuit High Voltage

Quick Answer

The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. Common causes include Faulty Power Take-Off (PTO) Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P251F Buick indicates Power Take-Off Engine Shutdown Control Circuit High Voltage.
Common causes: Common causes include Faulty Power Take-Off (PTO) Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 371

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 21, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P251F Buick Description

The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. The PTO system specifically controls engine speed to values higher than normal base idle, PTO load relay engagement, and remote starting and shutdown of the engine. When the operator requests PTO using either the PTO switch or PTO remote, the engine RPM will increase to a default standby speed. The Engine Control Module (ECM) converts the data from the engine speed sensor to a 2 pulses/engine revolution signal. When PTO is engaged, the power take-off control module sends a serial data message to the ECM requesting engine speeds, in response to signals from the PTO switch or remote.
The Diagnostic Trouble Code (DTC) will be set when the Power Take-Off Control Module detects a fault on the PTO engine shutdown control circuit that is above or below a predetermined voltage threshold.

OBDII Code P251F Buick - Power Take-Off Engine Shutdown Control Circuit High Voltage - AutoCodes.com — P251F Buick Code - Power Take-Off Engine Shutdown Control Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P251F Buick?

Faulty Power Take-Off (PTO) Control Module
Power Take-Off Control Module harness is open or shorted
Power Take-Off Control Module circuit poor electrical connection

How to Fix the DTC P251F Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P251F Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P251F Buick code?

Need more information on how to fix the P251F Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P251F Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P251F Buick Code

1. What are the common symptoms of OBDII code P251F in a Buick?

The common symptoms of OBDII code P251F in a Buick include the power take-off (PTO) system not functioning properly, engine shutdown control issues, and possibly a Check Engine light illuminated on the dashboard.

2. What could cause the OBDII code P251F to trigger in a Buick?

The OBDII code P251F in a Buick is typically triggered by a high voltage condition in the power take-off engine shutdown control circuit. This could be caused by damaged wiring, a faulty control module, or a malfunctioning sensor.

3. How serious is the OBDII code P251F in a Buick?

While the severity of the OBDII code P251F can vary, it is important to address this issue promptly as it can affect the proper operation of the power take-off system and engine shutdown control, potentially leading to safety concerns or further damage to the vehicle.

4. Can I still drive my Buick with the OBDII code P251F present?

It is not recommended to continue driving your Buick with the OBDII code P251F present, as it indicates a potential issue with the power take-off engine shutdown control circuit. Continuing to drive the vehicle in this condition may result in further damage or safety risks.

5. How can I diagnose and repair the OBDII code P251F in my Buick?

Diagnosing and repairing the OBDII code P251F in your Buick may require a professional scan tool to pinpoint the exact cause. Common repair steps include checking the wiring for damage, testing the control module and sensors, and replacing any faulty components as needed.

6. Is it safe to reset the OBDII code P251F in my Buick using a diagnostic tool?

While resetting the OBDII code P251F using a diagnostic tool may temporarily clear the code, it is important to address the underlying issue causing the code to prevent further problems. Resetting the code without proper diagnosis and repair may lead to recurring issues.

7. How much does it typically cost to repair the OBDII code P251F in a Buick?

The cost to repair the OBDII code P251F in a Buick can vary depending on the root cause of the issue, the extent of the damage, and labor costs. It is recommended to consult a professional mechanic for an accurate estimate based on your specific vehicle.

8. Can a DIY enthusiast fix the OBDII code P251F in a Buick?

While some DIY enthusiasts may have the skills to diagnose and repair the OBDII code P251F in a Buick, it is a complex issue that may require specialized tools and knowledge. For accurate diagnosis and safe repairs, it is recommended to consult a professional mechanic.

9. Will the OBDII code P251F in my Buick affect fuel efficiency?

The OBDII code P251F itself may not directly affect fuel efficiency in your Buick, but if left unresolved, it could lead to issues with the power take-off system and engine shutdown control, which may indirectly impact fuel efficiency over time.

10. How long does it typically take to repair the OBDII code P251F in a Buick?

The time it takes to repair the OBDII code P251F in a Buick can vary depending on the exact cause of the issue, parts availability, and the expertise of the mechanic. In general, it may take a few hours to a full day to diagnose and repair this code.