AutoCodes – Honda – P2413 Honda

P2413 Honda Code - Exhaust Gas Recirculation System Malfunction

Quick Answer

The Exhaust Gas Recirculation (EGR) valve is controlled by the Powertrain Control Module (PCM). Common causes include Faulty Exhaust Gas Recirculation (EGR) Control Solenoid Valve, EGR Solenoid Valve harness is open or shorted, EGR Solenoid Valve circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P2413 Honda indicates Exhaust Gas Recirculation System Malfunction.
Common causes: Common causes include Faulty Exhaust Gas Recirculation (EGR) Control Solenoid Valve, EGR Solenoid Valve harness is open or shorted, EGR Solenoid Valve circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 57,179

How popular is this code, among other codes? Medium

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 29, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2413 Honda Description

The Exhaust Gas Recirculation (EGR) valve is controlled by the Powertrain Control Module (PCM). When the EGR valve is open, exhaust gas flows from the exhaust manifold through the EGR valve, the intake manifold, and the EGR passage. The exhaust gas is circulated into the air/fuel mixture to lower the combustion temperatures, reducing oxides of nitrogen (NOx) emissions. A sensor (lift sensor) is built into the EGR valve and detects the amount of valve lift. The command value for the target valve lift is stored in the PCM so that exhaust gas recirculation can be optimized according to driving conditions. Comparing this command value with the lift sensor output signal value, the PCM controls the EGR valve to make the amount of actual valve lift equal to the command value. If the valve sensor output is not enough for the commanded valve lift, a malfunction is detected and a Diagnostic Trouble Code (DTC) is stored.

OBDII Code P2413 Honda - Exhaust Gas Recirculation System Malfunction - AutoCodes.com — P2413 Honda Code - Exhaust Gas Recirculation System Malfunction

What does this mean?

What are the Possible Causes of the DTC P2413 Honda?

Faulty Exhaust Gas Recirculation (EGR) Control Solenoid Valve
EGR Solenoid Valve harness is open or shorted
EGR Solenoid Valve circuit poor electrical connection

How to Fix the DTC P2413 Honda?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2413 Honda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2413 Honda code?

Need more information on how to fix the P2413 Honda code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2413 Honda code diagnosed by a professional: Find a repair shop in your area

Information for Specific Honda Models

P2413 2007 Honda CR-V — Exhaust Gas Recirculation System Malfunction

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.