AutoCodes – Honda – P2413 2007 Honda CR-V

P2413 2007 Honda CR-V Code - Exhaust Gas Recirculation System Malfunction

Quick Answer

The Exhaust Gas Recirculation (EGR) valve is controlled by the Powertrain Control Module (PCM). Common causes include Faulty Exhaust Gas Recirculation (EGR) Control Solenoid Valve, EGR Solenoid Valve harness is open or shorted, EGR Solenoid Valve circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P2413 2007 Honda CR-V indicates Exhaust Gas Recirculation System Malfunction.
Common causes: Common causes include Faulty Exhaust Gas Recirculation (EGR) Control Solenoid Valve, EGR Solenoid Valve harness is open or shorted, EGR Solenoid Valve circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 11,228

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 29, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2413 2007 Honda CR-V Description

The Exhaust Gas Recirculation (EGR) valve is controlled by the Powertrain Control Module (PCM). When the EGR valve is open, exhaust gas flows from the exhaust manifold through the EGR valve, the intake manifold, and the EGR passage. The exhaust gas is circulated into the air/fuel mixture to lower the combustion temperatures, reducing oxides of nitrogen (NOx) emissions. A sensor (lift sensor) is built into the EGR valve and detects the amount of valve lift. The command value for the target valve lift is stored in the PCM so that exhaust gas recirculation can be optimized according to driving conditions. Comparing this command value with the lift sensor output signal value, the PCM controls the EGR valve to make the amount of actual valve lift equal to the command value. If the valve sensor output is not enough for the commanded valve lift, a malfunction is detected and a Diagnostic Trouble Code (DTC) is stored.

OBDII Code P2413 2007 Honda CR-V - Exhaust Gas Recirculation System Malfunction - AutoCodes.com — P2413 2007 Honda CR-V Code - Exhaust Gas Recirculation System Malfunction

What does this mean?

What are the Possible Causes of the DTC P2413 2007 Honda CR-V?

Faulty Exhaust Gas Recirculation (EGR) Control Solenoid Valve
EGR Solenoid Valve harness is open or shorted
EGR Solenoid Valve circuit poor electrical connection

How to Fix the DTC P2413 2007 Honda CR-V?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2413 2007 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2413 2007 Honda CR-V code?

Need more information on how to fix the P2413 2007 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2413 2007 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2413 2007 Honda CR-V Code

1. What are common symptoms of OBDII code P2413 on a 2007 Honda CR-V?

- Common symptoms include rough idling, decreased fuel efficiency, and the illumination of the check engine light.

2. What does OBDII code P2413 indicate in a 2007 Honda CR-V?

- Code P2413 indicates a malfunction in the Exhaust Gas Recirculation (EGR) system.

3. What are possible causes of code P2413 on a 2007 Honda CR-V?

- Possible causes include a faulty EGR valve, clogged EGR passages, wiring issues, or a problem with the EGR temperature sensor.

4. How can I diagnose the EGR system to address code P2413 on a 2007 Honda CR-V?

- Diagnose the EGR system by checking the EGR valve for proper operation, inspecting for carbon buildup in the EGR passages, and testing the EGR temperature sensor.

5. Can a clogged EGR valve cause code P2413 on a 2007 Honda CR-V?

- Yes, a clogged EGR valve can restrict the flow of exhaust gases, leading to a malfunction in the EGR system and triggering code P2413.

6. What are some repair tips for resolving code P2413 on a 2007 Honda CR-V?

- Repair tips include cleaning or replacing the EGR valve, clearing any obstructions in the EGR passages, and ensuring proper electrical connections in the EGR system.

7. Is it safe to continue driving with OBDII code P2413 on a 2007 Honda CR-V?

- It is not recommended to drive with a malfunctioning EGR system as it can affect engine performance and emissions. Seek repairs promptly.

8. How can I reset the check engine light after addressing code P2413 on a 2007 Honda CR-V?

- Use an OBDII scanner to clear the trouble codes and reset the check engine light after repairing the issue with the EGR system.

9. Will code P2413 on a 2007 Honda CR-V cause the vehicle to fail emissions testing?

- Yes, code P2413 indicates a problem with the EGR system, which can lead to increased emissions. Addressing the issue is necessary to pass emissions testing.

10. Can a DIY enthusiast fix code P2413 on a 2007 Honda CR-V, or is professional help recommended?

- Depending on the skill level and tools available, a DIY enthusiast may be able to address code P2413 by following repair guides. However, professional help is recommended if unsure about diagnosis or repairs.