AutoCodes – Generic – P2413

P2413 Code - Exhaust Gas Recirculation System Performance

Quick Answer

The Exhaust Gas Recirculation (EGR) valve is controlled by the Powertrain Control Module (PCM). Common causes include Faulty Exhaust Gas Recirculation (EGR) Control Solenoid Valve, EGR Solenoid Valve harness is open or shorted, EGR Solenoid Valve circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P2413 indicates Exhaust Gas Recirculation System Performance.
Common causes: Common causes include Faulty Exhaust Gas Recirculation (EGR) Control Solenoid Valve, EGR Solenoid Valve harness is open or shorted, EGR Solenoid Valve circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 35,109

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 29, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2413 Description

The Exhaust Gas Recirculation (EGR) valve is controlled by the Powertrain Control Module (PCM). When the EGR valve is open, exhaust gas flows from the exhaust manifold through the EGR valve, the intake manifold, and the EGR passage. The exhaust gas is circulated into the air/fuel mixture to lower the combustion temperatures, reducing oxides of nitrogen (NOx) emissions. A sensor (lift sensor) is built into the EGR valve and detects the amount of valve lift. The command value for the target valve lift is stored in the PCM so that exhaust gas recirculation can be optimized according to driving conditions. Comparing this command value with the lift sensor output signal value, the PCM controls the EGR valve to make the amount of actual valve lift equal to the command value. If the valve sensor output is not enough for the commanded valve lift, a malfunction is detected and a Diagnostic Trouble Code (DTC) is stored.

OBDII Code P2413 - Exhaust Gas Recirculation System Performance - AutoCodes.com — P2413 Code - Exhaust Gas Recirculation System Performance

What does this mean?

What are the Possible Causes of the DTC P2413?

Faulty Exhaust Gas Recirculation (EGR) Control Solenoid Valve
EGR Solenoid Valve harness is open or shorted
EGR Solenoid Valve circuit poor electrical connection

How to Fix the DTC P2413?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2413 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2413 code?

Need more information on how to fix the P2413 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2413 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P2413 Acura — Exhaust Gas Recirculation System Malfunction
P2413 Audi — EGR System Performance
P2413 Dodge — Exhaust Gas Recirculation System Performance
P2413 Honda — Exhaust Gas Recirculation System Malfunction
P2413 Volkswagen — EGR System Performance

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2413 Code

1. What are common symptoms of OBDII code P2413 (Exhaust Gas Recirculation System Performance)?

- Common symptoms include decreased engine performance, rough idling, increased fuel consumption, and the illumination of the check engine light.

2. What are some possible causes of OBDII code P2413?

- Possible causes may include a faulty EGR valve, clogged EGR passages, a defective EGR temperature sensor, or issues with the EGR system wiring.

3. How can I diagnose the cause of OBDII code P2413?

- Diagnosis typically involves inspecting the EGR valve and system components for any signs of damage, checking for clogs in the EGR passages, and using a scan tool to monitor EGR system data.

4. Can I drive my vehicle with OBDII code P2413?

- It is generally not recommended to drive with this code present, as it can lead to decreased fuel efficiency and engine performance. It is best to address the issue promptly.

5. How can I repair OBDII code P2413?

- Repair methods may include cleaning or replacing the EGR valve, clearing any blockages in the EGR system, replacing the EGR temperature sensor, or fixing any wiring issues.

6. Is OBDII code P2413 a serious issue?

- While the severity may vary depending on the underlying cause, it is important to address this code promptly to prevent potential damage to the engine and ensure optimal vehicle performance.

7. Can a DIY enthusiast fix OBDII code P2413 at home?

- Depending on the cause of the code, some DIY enthusiasts may be able to address the issue at home by following repair guides and using basic tools. However, complex issues may require professional assistance.

8. How much does it typically cost to repair OBDII code P2413?

- The cost of repairs can vary based on the cause of the code, the specific components needing attention, and whether professional labor is required. It is advisable to obtain quotes from local mechanics or repair shops.

9. Will resetting the check engine light resolve OBDII code P2413?

- Simply resetting the check engine light will not fix the underlying issue causing the code. It may temporarily turn off the light, but the problem will persist and likely trigger the light again.

10. How can I prevent OBDII code P2413 from recurring?

- Regular maintenance of the EGR system, ensuring proper engine performance, and promptly addressing any related issues can help prevent the recurrence of OBDII code P2413.