P2314 - Ignition Coil 'E' Secondary Circuit

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3   
Comments  |  Add Comment

Possible causes

  • Faulty Ignition Coil 'E'
  • Ignition Coil 'E' harness is open or shorted
  • Ignition Coil 'E' circuit poor electrical connection

Possible symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Engine may be running rough

P2314 Description

The current flow, or dwell, through the primary ignition coil is controlled by the Powertrain Control Module (PCM) by providing a switched ground path through the ignition coil driver to ground. When the ignition coil driver is switched on, current rapidly builds up to a maximum value, determined by the coil inductance and resistance. When the current is switched off, the magnetic field collapses which induces a secondary high voltage surge and the spark plug is fired. This high voltage surge creates a flyback voltage which the PCM uses as a feedback during the ignition diagnostics. The PCM continuously monitors the ignition system for concerns. The P2307 code sets when the PCM detects a short to voltage in the circuit.
OBDII Code P2314 - Ignition Coil 'E' Secondary Circuit - AutoCodes.com

P2314 Information for specific makes

Need more help?

Get the P2314 code diagnosed by a professional: Find a repair shop in your area

Related Information

P2314 Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2314 code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧