P2314 Audi Code - Ignition Coil 5 Secondary Circuit
Quick Answer
The current flow, or dwell, through the primary ignition coil is controlled by the Powertrain Control Module (PCM) by providing a switched ground path through the ignition coil driver to ground. Common causes include Faulty spark plug or coil boot, Faulty Ignition Coil 5, Ignition Coil 5 harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2314 Audi indicates Ignition Coil 5 Secondary Circuit.
- Common causes
- Common causes include Faulty spark plug or coil boot, Faulty Ignition Coil 5, Ignition Coil 5 harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2314 Audi Description
What are the Possible Causes of the DTC P2314 Audi?
- Faulty spark plug or coil boot
- Faulty Ignition Coil 5
- Ignition Coil 5 harness is open or shorted
- Ignition Coil 5 circuit poor electrical connection
How to Fix the DTC P2314 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2314 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2314 Audi code?
Need more information on how to fix the P2314 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2314 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2314 Audi Code
1. What are the common symptoms of OBDII code P2314 in an Audi related to Ignition Coil 5 Secondary Circuit?
- Common symptoms include engine misfires, rough idling, loss of power, and illuminated Check Engine Light.
2. What are the possible causes of OBDII code P2314 in an Audi indicating an issue with Ignition Coil 5 Secondary Circuit?
- The code can be triggered by a faulty ignition coil, damaged wiring or connectors, a malfunctioning ECM, or issues with the spark plug.
3. How can I diagnose the source of OBDII code P2314 in my Audi for Ignition Coil 5 Secondary Circuit?
- Use a diagnostic scanner to pinpoint the exact cause, visually inspect the ignition coil and related components, check wiring for damage, and perform a resistance test on the coil.
4. Can driving with OBDII code P2314 in an Audi for Ignition Coil 5 Secondary Circuit cause further damage?
- Continuing to drive with this code can lead to more severe engine issues, reduced fuel efficiency, and potential damage to the catalytic converter.
5. What is the typical repair process for resolving OBDII code P2314 in an Audi linked to Ignition Coil 5 Secondary Circuit?
- The repair process usually involves replacing the faulty ignition coil, repairing or replacing damaged wiring, clearing the code with a diagnostic tool, and conducting a test drive to ensure the issue is resolved.
6. Are there any preventive maintenance tips to help avoid OBDII code P2314 in an Audi related to Ignition Coil 5 Secondary Circuit?
- Regularly servicing the ignition system, replacing spark plugs at recommended intervals, and addressing any engine performance issues promptly can help prevent this code.
7. Can a DIY enthusiast without much experience address OBDII code P2314 in an Audi for Ignition Coil 5 Secondary Circuit?
- While some basic troubleshooting steps can be performed by a DIY enthusiast, it is recommended to consult a professional mechanic for accurate diagnosis and repair to avoid further damage.
8. How much does it typically cost to repair OBDII code P2314 in an Audi due to Ignition Coil 5 Secondary Circuit issues?
- The cost can vary depending on the exact cause and location, but it usually ranges from $100 to $300 for parts and labor.
9. Can a loose gas cap trigger OBDII code P2314 in an Audi for Ignition Coil 5 Secondary Circuit?
- No, a loose gas cap is unrelated to this specific code. It is typically caused by ignition system issues as mentioned earlier.
10. Is it safe to continue driving an Audi with OBDII code P2314 for Ignition Coil 5 Secondary Circuit if the symptoms are not severe?
- It is not recommended to continue driving the vehicle as unresolved ignition coil issues can lead to more serious engine problems over time.
Discuss the causes and fixes for P2314 Audi OBDII Code
Code P2314 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
