P2240 Toyota Code - A/F Sensor Bank 2 Open Circuit
Quick Answer
The Air-Fuel ratio (A/F) sensor provides output voltage approximately equal to the existing air-fuel ratio. Common causes include Faulty Air/Fuel Sensor Bank 2, Air/Fuel Sensor Bank 2 harness is open or shorted, Air/Fuel Sensor Bank 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P2240 Toyota indicates A/F Sensor Bank 2 Open Circuit.
- Common causes
- Common causes include Faulty Air/Fuel Sensor Bank 2, Air/Fuel Sensor Bank 2 harness is open or shorted, Air/Fuel Sensor Bank 2 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P2240 Toyota Description
The A/F sensor output voltage is used to provide feedback for the Engine Control Module (ECM) to control the air-fuel ratio.
With the A/F sensor output, the ECM can determine deviation from the stoichiometric air-fuel ratio and control proper injection time. If the A/F sensor is malfunctioning, the ECM is unable to accurately control air-fuel ratio.
The A/F sensor is equipped with a heater which heats the zirconia element. The heater is also controlled by the ECM. When the intake air volume is low (the temperature of the exhaust gas is low), current flows to the heater which heats the sensor to facilitate detection of accurate oxygen concentration.
The A/F sensor is a planar type. Compared to a conventional type, the sensor and heater portions are narrower. Because the heat of the heater is conducted through the alumina to zirconia (of the sensor portion), sensor activation is accelerated.
The code is output when there is an open or short in the A/F sensor circuit, or if A/F sensor output drops. To detect these problems, the voltage of the A/F sensor is monitored when turning the ignition switch to the ON position, and the admittance (admittance is an electrical term that indicates the ease of flow of current) is checked while driving. If the voltage of the A/F sensor is between 0.6 V and 4.5 V, it is considered normal. If the voltage is outside of the specified range, or the admittance is less than the standard value, the ECM will determine that there is a malfunction in the A/F sensor. If the same malfunction is detected in the next driving cycle, the MIL is illuminated and a DTC is set.
What are the Possible Causes of the DTC P2240 Toyota?
- Faulty Air/Fuel Sensor Bank 2
- Air/Fuel Sensor Bank 2 harness is open or shorted
- Air/Fuel Sensor Bank 2 circuit poor electrical connection
- Air/Fuel Sensor Relay
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2240 Toyota?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2240 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2240 Toyota code?
Need more information on how to fix the P2240 Toyota code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2240 Toyota code diagnosed by a professional: Find a repair shop in your area
Information for Specific Toyota Models
- P2240 2006 Toyota Camry — Oxygen A/F Sensor Pumping Current Circuit Open Bank 2 Sensor 1
- P2240 2007 Toyota Camry — Oxygen A/F Sensor Pumping Current Circuit Open Bank 2 Sensor 1
- P2240 2008 Toyota Camry — Oxygen A/F Sensor Pumping Current Circuit Open Bank 2 Sensor 1
- P2240 2009 Toyota Camry — Oxygen A/F Sensor Pumping Current Circuit Open Bank 2 Sensor 1
- P2240 2010 Toyota Camry — Oxygen A/F Sensor Pumping Current Circuit Open Bank 2 Sensor 1
- P2240 2011 Toyota Camry — Oxygen A/F Sensor Pumping Current Circuit Open Bank 2 Sensor 1
Frequently Asked Questions about P2240 Toyota Code
1. What are the common symptoms of OBDII code P2240 in a Toyota, indicating an A/F Sensor Bank 2 Open Circuit issue?
Common symptoms include poor engine performance, decreased fuel efficiency, rough idling, and illuminated Check Engine Light.
2. What are the possible causes of the A/F Sensor Bank 2 Open Circuit trouble code (P2240) in a Toyota?
Potential causes may include a faulty A/F sensor, damaged wiring or connectors, a blown fuse, or issues with the engine control module.
3. How can I diagnose the A/F Sensor Bank 2 Open Circuit problem in my Toyota if I have limited experience with car repairs?
You can start by visually inspecting the sensor and its connections for any visible damage. It's also helpful to use an OBDII scanner to retrieve the specific fault code and further pinpoint the issue.
4. Is it safe to continue driving my Toyota with the P2240 code related to an A/F Sensor Bank 2 Open Circuit?
It is not recommended to drive your vehicle with this code active, as it can lead to potential engine damage and further issues down the line. It's best to address the problem promptly.
5. Can I reset the Check Engine Light caused by the P2240 code without fixing the underlying A/F Sensor Bank 2 Open Circuit issue?
Resetting the Check Engine Light without addressing the root cause will only temporarily turn off the light. The underlying issue causing the code will persist and may lead to more severe problems over time.
6. Are there any DIY repair tips for fixing the A/F Sensor Bank 2 Open Circuit problem in my Toyota?
If you have the necessary skills and tools, you may attempt to replace the A/F sensor yourself. However, it's recommended to consult a professional mechanic for accurate diagnosis and repair.
7. How much does it typically cost to repair the A/F Sensor Bank 2 Open Circuit issue in a Toyota?
The cost of repair can vary depending on the extent of the problem, the model of your Toyota, and labor rates in your area. It's best to get a few quotes from local repair shops for an accurate estimate.
8. Can extreme weather conditions or driving habits contribute to triggering the P2240 code related to the A/F Sensor Bank 2 Open Circuit?
Yes, extreme temperatures, harsh driving conditions, or prolonged use of poor-quality fuel can potentially impact the A/F sensor's performance and lead to the code being triggered.
9. Will replacing the A/F sensor on Bank 2 solve the P2240 trouble code in my Toyota?
While replacing the A/F sensor is a common solution for this code, it's essential to ensure that all related wiring and connectors are inspected and repaired as needed to prevent the issue from recurring.
10. How often should I have my Toyota's A/F sensor inspected to prevent the recurrence of the P2240 code?
It's a good practice to have your A/F sensor inspected during routine maintenance intervals or whenever you experience symptoms of poor engine performance. Regular checks can help catch potential issues early and prevent the code from appearing again.
Discuss the causes and fixes for P2240 Toyota OBDII Code
Code P2240 Toyota comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
