AutoCodes – Generic – P2167

P2167 Code - Throttle/Pedal Position Sensor 'E' Maximum Stop Performance

Quick Answer

The Powertrain Control Module (PCM) monitors the electronic throttle for the ability of the throttle plate to reach the upper mechanical stop position within a calibrated amount of time at ignition ON. Common causes include Faulty Electronic Throttle Control (ETC), Electronic Throttle Control (ETC) harness is open or shorted, Electronic Throttle Control (ETC) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2167 indicates Throttle/Pedal Position Sensor 'E' Maximum Stop Performance.
Common causes: Common causes include Faulty Electronic Throttle Control (ETC), Electronic Throttle Control (ETC) harness is open or shorted, Electronic Throttle Control (ETC) Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 15,860

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2167 Description

The Powertrain Control Module (PCM) monitors the electronic throttle for the ability of the throttle plate to reach the upper mechanical stop position within a calibrated amount of time at ignition ON. The P2167 code sets if the throttle plate does not reach the upper mechanical stop position within a calibrated amount of time.

OBDII Code P2167 - Throttle/Pedal Position Sensor 'E' Maximum Stop Performance - AutoCodes.com — P2167 Code - Throttle/Pedal Position Sensor 'E' Maximum Stop Performance

What does this mean?

What are the Possible Causes of the DTC P2167?

Faulty Electronic Throttle Control (ETC)
Electronic Throttle Control (ETC) harness is open or shorted
Electronic Throttle Control (ETC) Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P2167?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2167 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2167 code?

Need more information on how to fix the P2167 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2167 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P2167 Dodge — Throttle/Pedal Position Sensor 'E' Maximum Stop Performance

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2167 Code

1. What are the common symptoms of OBDII code P2167?

- Common symptoms include engine stalling, rough idle, reduced engine power, and acceleration issues.

2. What causes the OBDII code P2167 to be triggered?

- The code is typically triggered by a faulty throttle or pedal position sensor, wiring issues, or a problem with the electronic throttle control system.

3. How can I diagnose the cause of OBDII code P2167?

- To diagnose the issue, you can use a scan tool to check for the code, visually inspect the throttle and pedal position sensors and their wiring, and perform a resistance test on the sensors.

4. What are some repair tips for fixing OBDII code P2167?

- Repair tips include checking and cleaning the throttle body, replacing the throttle or pedal position sensor, repairing any damaged wiring, and performing a throttle relearn procedure.

5. Can I drive my vehicle with OBDII code P2167?

- It is not recommended to drive your vehicle with this code as it can lead to unsafe driving conditions and potential damage to the engine.

6. How much does it cost to repair OBDII code P2167?

- The cost of repair can vary depending on the cause of the code and the specific parts that need to be replaced. It is recommended to get a diagnostic from a mechanic for an accurate cost estimate.

7. How long does it take to repair OBDII code P2167?

- The repair time can vary depending on the extent of the issue and the availability of parts. In some cases, the repair can be completed in a few hours, while more complex issues may take longer.

8. Can I reset OBDII code P2167 without fixing the underlying issue?

- While you can clear the code using a scan tool, it is not recommended to do so without addressing the underlying problem, as the issue may persist and lead to further damage.

9. Are there any preventive measures to avoid OBDII code P2167 in the future?

- Regular maintenance of the throttle and pedal position sensors, as well as keeping the electronic throttle control system clean and free of debris, can help prevent the recurrence of this code.

10. What should I do if OBDII code P2167 keeps coming back after repairs?

- If the code keeps coming back after repairs, it may indicate a persistent issue with the sensors or the throttle control system, and further diagnosis by a professional mechanic may be necessary.