P2167 Dodge Code - Throttle/Pedal Position Sensor 'E' Maximum Stop Performance
Quick Answer
The Powertrain Control Module (PCM) monitors the electronic throttle for the ability of the throttle plate to reach the upper mechanical stop position within a calibrated amount of time at ignition ON. Common causes include Faulty Electronic Throttle Control (ETC), Electronic Throttle Control (ETC) harness is open or shorted, Electronic Throttle Control (ETC) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2167 Dodge indicates Throttle/Pedal Position Sensor 'E' Maximum Stop Performance.
- Common causes
- Common causes include Faulty Electronic Throttle Control (ETC), Electronic Throttle Control (ETC) harness is open or shorted, Electronic Throttle Control (ETC) Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2167 Dodge Description
What are the Possible Causes of the DTC P2167 Dodge?
- Faulty Electronic Throttle Control (ETC)
- Electronic Throttle Control (ETC) harness is open or shorted
- Electronic Throttle Control (ETC) Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2167 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2167 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2167 Dodge code?
Need more information on how to fix the P2167 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2167 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2167 Dodge Code
1. What does the OBDII code P2167 mean on a Dodge?
P2167 indicates a problem with the Throttle/Pedal Position Sensor 'E', specifically that its maximum stop performance is out of range or not functioning as expected.
2. What are the common symptoms of the P2167 code on a Dodge?
Symptoms may include reduced engine performance, difficulty accelerating, an illuminated check engine light, and the vehicle potentially entering limp mode.
3. What causes the P2167 code to appear on a Dodge?
Possible causes include a faulty throttle position sensor (TPS), damaged or corroded wiring, a malfunctioning electronic throttle body, or issues with the vehicle's powertrain control module (PCM).
4. How do I diagnose the P2167 code on a Dodge?
Diagnosis involves using an OBDII scanner to confirm the code, inspecting the throttle position sensor and related wiring for damage, and testing the sensor and throttle body components for proper operation.
5. Can I drive my Dodge with the P2167 code?
Driving with this code is not recommended, as it may cause reduced performance, unsafe driving conditions, or further damage to the vehicle's throttle system.
6. How do I fix the P2167 code on a Dodge?
Repairs may include replacing the throttle position sensor, repairing or replacing damaged wiring, cleaning or replacing the electronic throttle body, or reprogramming/updating the PCM.
7. How much does it cost to repair the P2167 code on a Dodge?
Repair costs vary but typically range from $150 to $500, depending on whether the issue is with the sensor, wiring, throttle body, or PCM.
8. Can a dirty throttle body cause the P2167 code on a Dodge?
Yes, a dirty or clogged throttle body can interfere with sensor readings and trigger the P2167 code. Cleaning the throttle body may resolve the issue.
9. Do I need to reset the PCM after fixing the P2167 code on my Dodge?
Yes, after completing repairs, the PCM should be reset using an OBDII scanner to clear the code and verify that the issue is resolved.
10. Is the P2167 code specific to Dodge vehicles?
No, the P2167 code is a generic OBDII code and can appear on other makes and models, but the specific causes and repairs may vary by vehicle.
Discuss the causes and fixes for P2167 Dodge OBDII Code
Code P2167 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
