AutoCodes – Generic – P1DA2

P1DA2 Code - Incorrect Gear Ratio Clutch 'B' 'C' Or 'E' Defective

Quick Answer

The Transmission Control Module (TCM) monitors for conditions which lead to an unexpected transmission gear ratio (e.g. Common causes include Faulty Transmission Internal Components. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1DA2 indicates Incorrect Gear Ratio Clutch 'B' 'C' Or 'E' Defective .
Common causes: Common causes include Faulty Transmission Internal Components.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,158

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 21, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1DA2 Description

The Transmission Control Module (TCM) monitors for conditions which lead to an unexpected transmission gear ratio (e.g. slipping clutches, hydraulic or mechanical defects, etc.). The TCM compares the actual gear ratio (i.e. the ratio of input speed to output speed) to a minimum and maximum calibrated gear ratio value. The TCM performs this comparison while driving in a fixed gear, during gear engagement, and during shifting from one gear to another.

OBDII Code P1DA2 - Incorrect Gear Ratio Clutch 'B' 'C' Or 'E' Defective - AutoCodes.com — P1DA2 Code - Incorrect Gear Ratio Clutch 'B' 'C' Or 'E' Defective

What does this mean?

What are the Possible Causes of the DTC P1DA2?

Faulty Transmission Internal Components

How to Fix the DTC P1DA2?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1DA2 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1DA2 code?

Need more information on how to fix the P1DA2 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1DA2 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P1DA2 Acura — Voltage Control Unit Low Side Open Fail
P1DA2 Chrysler — Incorrect Gear Ratio Clutch 'B' 'C' Or 'E' Defective
P1DA2 Dodge — Incorrect Gear Ratio Clutch 'B' 'C' Or 'E' Defective
P1DA2 Fiat — Incorrect Gear Ratio Clutch 'B' 'C' Or 'E' Defective
P1DA2 Honda — Voltage Control Unit Low Side Open Fail
P1DA2 Jeep — Incorrect Gear Ratio Clutch 'B' 'C' Or 'E' Defective

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1DA2 Code

1. What are common symptoms of OBDII code P1DA2 (Incorrect Gear Ratio Clutch 'B' 'C' Or 'E' Defective)?

- Common symptoms include erratic shifting, hesitation during acceleration, reduced fuel efficiency, and illuminated Check Engine Light.

2. What are the possible causes of OBDII code P1DA2?

- The code P1DA2 can be triggered by a defective clutch 'B', 'C', or 'E', issues with the transmission control module, or wiring/connectivity problems.

3. How can I diagnose the source of OBDII code P1DA2?

- Diagnosing the code typically involves inspecting the clutch components, checking the transmission fluid level and condition, and using a diagnostic scan tool to analyze the transmission control module.

4. Can driving with OBDII code P1DA2 cause further damage to the vehicle?

- Continuing to drive with code P1DA2 may lead to increased wear on the transmission components and potentially cause further damage over time if left unresolved.

5. What are some repair tips for fixing OBDII code P1DA2?

- Repairing code P1DA2 may involve replacing the defective clutch components, repairing wiring issues, updating the transmission control module software, or seeking assistance from a certified mechanic.

6. Is it safe to continue driving my vehicle with the Check Engine Light on due to code P1DA2?

- It is not recommended to drive with the Check Engine Light on, as it indicates a potential issue that may affect the performance and safety of the vehicle.

7. How much does it typically cost to repair OBDII code P1DA2?

- The cost of repairing code P1DA2 can vary depending on the extent of the issue, the parts needed, and the labor costs involved. It is advisable to obtain quotes from different repair shops for an accurate estimate.

8. Can I reset OBDII code P1DA2 on my own?

- While you can clear the code using an OBDII scanner, it is important to address the underlying issue causing the code before resetting it to prevent the problem from recurring.

9. Will OBDII code P1DA2 affect the drivability of my vehicle?

- Yes, OBDII code P1DA2 can affect the drivability of your vehicle by causing shifting problems, reduced performance, and potential transmission issues if not addressed promptly.

10. How long does it take to fix OBDII code P1DA2?

- The duration of the repair for code P1DA2 can vary depending on the complexity of the issue, availability of parts, and the repair shop's workload. It is best to consult with a professional for an accurate timeframe.