P176B GMC Code - Intermediate Speed Sensor Circuit Performance
Quick Answer
The sensor contains a hall-effect sensor and additional electronics that process the signal. Common causes include Faulty Transmission Intermediate Shaft Speed Sensor, Transmission Intermediate Shaft Speed Sensor harness is open or shorted, Transmission Intermediate Shaft Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P176B GMC indicates Intermediate Speed Sensor Circuit Performance.
- Common causes
- Common causes include Faulty Transmission Intermediate Shaft Speed Sensor, Transmission Intermediate Shaft Speed Sensor harness is open or shorted, Transmission Intermediate Shaft Speed Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P176B GMC Description
The sensor is an input to the control module. The input signal is used to determine the rotational speed of the component, the Diagnostic Trouble Code (DTC) will be set when the reaction Carrier Assembly Transmission Intermediate Speed Sensor is greater than 60 RPM on gears 1, 2.
What are the Possible Causes of the DTC P176B GMC?
- Faulty Transmission Intermediate Shaft Speed Sensor
- Transmission Intermediate Shaft Speed Sensor harness is open or shorted
- Transmission Intermediate Shaft Speed Sensor circuit poor electrical connection
- Faulty Transmission Control Module
How to Fix the DTC P176B GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P176B GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P176B GMC code?
Need more information on how to fix the P176B GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P176B GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P176B 2014 GMC Sierra — Intermediate Speed Sensor Circuit Performance
- P176B 2015 GMC Sierra — Intermediate Speed Sensor Circuit Performance
- P176B 2016 GMC Sierra — Intermediate Speed Sensor Circuit Performance
- P176B 2017 GMC Sierra — Intermediate Speed Sensor Circuit Performance
- P176B 2018 GMC Sierra — Intermediate Speed Sensor Circuit Performance
Frequently Asked Questions about P176B GMC Code
1. What are common symptoms of OBDII code P176B (GMC) related to the Intermediate Speed Sensor Circuit Performance?
- Common symptoms include erratic shifting, transmission slipping, and illuminated Check Engine Light.
2. What are the possible causes of OBDII code P176B (GMC) indicating issues with the Intermediate Speed Sensor Circuit?
- Potential causes include a faulty intermediate speed sensor, damaged wiring or connectors, low transmission fluid, or a malfunctioning transmission control module.
3. How can I diagnose the source of OBDII code P176B (GMC) myself?
- You can start by checking the transmission fluid level and condition, inspecting the wiring and connectors for any damage, and using an OBDII scanner to retrieve detailed diagnostic trouble codes.
4. Is it safe to continue driving with OBDII code P176B (GMC) present?
- It is not recommended to drive with this code present as it can lead to further transmission issues and potential safety hazards. Prompt attention and repairs are advised.
5. Are there any DIY repair tips for resolving OBDII code P176B (GMC) involving the Intermediate Speed Sensor Circuit?
- DIY repair tips include checking and cleaning the connectors, replacing the intermediate speed sensor if faulty, and ensuring proper transmission fluid levels and quality.
6. How much does it typically cost to repair OBDII code P176B (GMC) related to the Intermediate Speed Sensor Circuit?
- Repair costs can vary depending on the exact cause of the issue, but expect to pay anywhere from $100 to $500 for parts and labor.
7. Can a professional mechanic help with diagnosing and repairing OBDII code P176B (GMC)?
- Yes, a professional mechanic with experience in transmission systems can accurately diagnose the issue and perform the necessary repairs to resolve OBDII code P176B.
8. Will resetting the OBDII system clear OBDII code P176B (GMC) permanently?
- Resetting the system may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to return. It's important to diagnose and fix the root cause.
9. How long does it take to repair OBDII code P176B (GMC) related to the Intermediate Speed Sensor Circuit?
- The repair time can vary depending on the exact cause and complexity of the issue, but it typically takes a few hours to a full day to diagnose and fix the problem.
10. Can OBDII code P176B (GMC) cause further damage if left untreated?
- Yes, ignoring OBDII code P176B can lead to more severe transmission issues over time, potentially resulting in costly repairs or transmission failure.
Discuss the causes and fixes for P176B GMC OBDII Code
Code P176B GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
