P176B 2015 GMC Sierra Code - Intermediate Speed Sensor Circuit Performance
Quick Answer
The sensor contains a hall-effect sensor and additional electronics that process the signal. Common causes include Faulty Transmission Intermediate Shaft Speed Sensor, Transmission Intermediate Shaft Speed Sensor harness is open or shorted, Transmission Intermediate Shaft Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P176B 2015 GMC Sierra indicates Intermediate Speed Sensor Circuit Performance.
- Common causes
- Common causes include Faulty Transmission Intermediate Shaft Speed Sensor, Transmission Intermediate Shaft Speed Sensor harness is open or shorted, Transmission Intermediate Shaft Speed Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P176B 2015 GMC Sierra Description
The sensor is an input to the control module. The input signal is used to determine the rotational speed of the component, the Diagnostic Trouble Code (DTC) will be set when the reaction Carrier Assembly Transmission Intermediate Speed Sensor is greater than 60 RPM on gears 1, 2.
What are the Possible Causes of the DTC P176B 2015 GMC Sierra?
- Faulty Transmission Intermediate Shaft Speed Sensor
- Transmission Intermediate Shaft Speed Sensor harness is open or shorted
- Transmission Intermediate Shaft Speed Sensor circuit poor electrical connection
- Faulty Transmission Control Module
How to Fix the DTC P176B 2015 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P176B 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P176B 2015 GMC Sierra code?
Need more information on how to fix the P176B 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P176B 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P176B 2015 GMC Sierra Code
Q: What does the OBDII code P176B mean for a 2015 GMC Sierra?
A: Code P176B indicates an issue with the Intermediate Speed Sensor Circuit Performance, meaning the sensor is not functioning within the expected range.
Q: What are the common symptoms of the P176B code on a 2015 GMC Sierra?
A: Symptoms may include erratic shifting, harsh gear changes, transmission slipping, or the Check Engine Light being illuminated.
Q: What causes the P176B code to appear on a 2015 GMC Sierra?
A: Common causes include a faulty intermediate speed sensor, damaged wiring or connectors, a malfunctioning transmission control module (TCM), or internal transmission issues.
Q: How can I diagnose the P176B code on my 2015 GMC Sierra?
A: Diagnosis involves using an OBDII scanner to confirm the code, visually inspecting the sensor and wiring, testing the sensor with a multimeter, and checking the TCM for errors.
Q: Can I drive my 2015 GMC Sierra with the P176B code active?
A: Driving with this code is not recommended as it can cause further damage to the transmission and affect drivability.
Q: How is the P176B code typically fixed on a 2015 GMC Sierra?
A: Repairs may include replacing the faulty intermediate speed sensor, repairing or replacing damaged wiring, or reprogramming or replacing the TCM if needed.
Q: How much does it cost to repair the P176B code on a 2015 GMC Sierra?
A: Costs vary but typically range from $200 to $500, depending on whether the sensor, wiring, or TCM needs repair or replacement.
Q: Where is the intermediate speed sensor located on a 2015 GMC Sierra?
A: The intermediate speed sensor is usually located inside the transmission, near the valve body or output shaft.
Q: Can a low transmission fluid level cause the P176B code?
A: While low transmission fluid is not a direct cause, it can contribute to poor sensor performance or transmission issues that trigger the code.
Q: Do I need to reset the Check Engine Light after repairing the P176B code on my 2015 GMC Sierra?
A: Yes, after completing the repair, use an OBDII scanner to clear the code and reset the Check Engine Light. If the issue is resolved, the light should not return.
Discuss the causes and fixes for P176B 2015 GMC Sierra OBDII Code
Code P176B 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
