P1753 HONDA - Problem in Torque Converter Clutch Solenoid Valve Circuit
- Low transmission fluid level
- Dirty transmission fluid
- Torque Converter Clutch Solenoid harness is open or shorted
- Torque Converter Clutch Solenoid circuit poor electrical connection
- Faulty Torque Converter Clutch Solenoid
Tech notesSome Acura may have a short to ground in the BLK/YEL alternator wire and could cause the ECM/PCM to set the P1753 code and intermittently blow the No. 6 (15A) fuse in the driver’s under-dash fuse/relay box. To fix this problem, you need to repair the damaged wire insulation and replace the blown No. 6 fuse.
- Engine Light ON (or Service Engine Soon Warning Light)
- Transmission will not shift gears.
P1753 Honda DescriptionThe torque converter clutch solenoid valve switches the hydraulic circuit to engage/disengage the torque converter clutch. When the torque converter clutch solenoid valve is turned ON, hydraulic pressure is applied to the torque converter clutch. When the torque converter clutch solenoid valve is turned OFF, hydraulic pressure to the torque converter clutch is interrupted.
The powertrain control module (PCM) controls the torque converter clutch solenoid valve. The driver circuit has a diagnostic function that detects and outputs the state of a short or open circuit, and sends a return signal to the PCM. If the return signal during the PCMs command is not appropriate, the PCM detects a malfunction and stores a DTC.
P1753 Honda Information for specific Honda models
Need more help?Get the P1753 Honda code diagnosed by a professional: Find a repair shop in your area
P1753 HONDA CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1753 Honda code? Have you replaced any parts?
Any information is appreciated. Thanks