AutoCodesGeneric – P16F0

P16F0 Code - Control Module Serial Peripheral Interface Bus 1

Quick Answer

This diagnostic applies to internal microprocessor integrity conditions within the device. Common causes include Low battery voltage, Reprogram Powertrain Control Module (PCM), Faulty Powertrain Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P16F0 indicates Control Module Serial Peripheral Interface Bus 1.
Common causes
Common causes include Low battery voltage, Reprogram Powertrain Control Module (PCM), Faulty Powertrain Control Module.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,842
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jul 26, 2021
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P16F0 Description

This diagnostic applies to internal microprocessor integrity conditions within the device. This diagnostic also addresses if the device is not programmed. The device monitors its ability to read and write to the memory. It also monitors a timing function. No external circuits are involved. The Diagnostic Trouble Code (DTC) will be set when the device detects an internal malfunction or incomplete programming.
OBDII Code P16F0 - Control Module Serial Peripheral Interface Bus 1 - AutoCodes.com
P16F0 Code - Control Module Serial Peripheral Interface Bus 1

What are the Possible Causes of the DTC P16F0?

  • Low battery voltage
  • Reprogram Powertrain Control Module (PCM)
  • Faulty Powertrain Control Module
  • Powertrain Control Module harness is open or shorted
  • Powertrain Control Module circuit poor electrical connection

How to Fix the DTC P16F0?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P16F0 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P16F0 code?

Need more information on how to fix the P16F0 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P16F0 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

  • P16F0 Acura — ECM Internal Circuit Malfunction Starter Control Circuit Malfunction
  • P16F0 Buick — Control Module Serial Peripheral Interface Bus 1
  • P16F0 Cadillac — Control Module Serial Peripheral Interface Bus 1
  • P16F0 Chevrolet — Control Module Serial Peripheral Interface Bus 1
  • P16F0 GMC — Control Module Serial Peripheral Interface Bus 1
  • P16F0 Honda — ECM Internal Circuit Malfunction Starter Control Circuit Malfunction
About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P16F0 Code

What does the OBDII code P16F0 mean?

P16F0 indicates an issue with the Control Module Serial Peripheral Interface (SPI) Bus 1, where communication between modules via this bus has been disrupted.

What are the common symptoms of code P16F0?

Symptoms may include an illuminated check engine light, erratic vehicle behavior, performance issues, or failure of certain electronic components.

What causes the P16F0 code?

Common causes include faulty wiring or connections in the SPI bus, a malfunctioning control module, software glitches, or damage to the SPI bus circuit.

Can I drive with the P16F0 code?

It is not recommended, as the issue may lead to unpredictable electronic behavior or failure of critical vehicle systems.

How is the P16F0 code diagnosed?

A technician will use a scan tool to confirm the code, inspect SPI bus wiring and connections, and test the functionality of the involved control modules.

What repairs are needed to fix the P16F0 code?

Repairs may involve repairing or replacing damaged wiring, cleaning or tightening connections, updating module software, or replacing a faulty control module.

Can a software update fix the P16F0 code?

Yes, if the code is caused by a software glitch, updating the affected module’s firmware may resolve the issue.

Is the P16F0 code specific to certain vehicle makes or models?

No, the P16F0 code can appear in various vehicles equipped with OBDII systems and SPI bus communication.

How much does it cost to repair the P16F0 code?

Repair costs depend on the cause, with minor wiring fixes ranging from $50 to $150 and module replacement costing several hundred dollars.

How can I prevent the P16F0 code from recurring?

Regular maintenance, keeping electrical connections clean and secure, and addressing wiring issues promptly can help prevent this code.

Discuss the causes and fixes for P16F0 OBDII Code

Code P16F0 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play