AutoCodes – GMC – P16F0 GMC

P16F0 GMC Code - Control Module Serial Peripheral Interface Bus 1

Quick Answer

This diagnostic applies to internal microprocessor integrity conditions within the device. Common causes include Low battery voltage, Reprogram Powertrain Control Module (PCM), Faulty Powertrain Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P16F0 GMC indicates Control Module Serial Peripheral Interface Bus 1.
Common causes: Common causes include Low battery voltage, Reprogram Powertrain Control Module (PCM), Faulty Powertrain Control Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,458

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 26, 2021

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P16F0 GMC Description

This diagnostic applies to internal microprocessor integrity conditions within the device. This diagnostic also addresses if the device is not programmed. The device monitors its ability to read and write to the memory. It also monitors a timing function. No external circuits are involved. The Diagnostic Trouble Code (DTC) will be set when the device detects an internal malfunction or incomplete programming.

OBDII Code P16F0 GMC - Control Module Serial Peripheral Interface Bus 1 - AutoCodes.com — P16F0 GMC Code - Control Module Serial Peripheral Interface Bus 1

What does this mean?

What are the Possible Causes of the DTC P16F0 GMC?

Low battery voltage
Reprogram Powertrain Control Module (PCM)
Faulty Powertrain Control Module
Powertrain Control Module harness is open or shorted
Powertrain Control Module circuit poor electrical connection

How to Fix the DTC P16F0 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P16F0 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P16F0 GMC code?

Need more information on how to fix the P16F0 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P16F0 GMC code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P16F0 GMC Code

1. What are the common symptoms of OBDII code P16F0 GMC?

- Common symptoms include issues with the vehicle's transmission, such as harsh shifting, hesitation, or lack of power.

2. What can cause OBDII code P16F0 GMC to trigger?

- This code is typically triggered by a malfunction in the Control Module Serial Peripheral Interface Bus 1, often due to wiring issues or a faulty control module.

3. How can I diagnose the cause of OBDII code P16F0 GMC?

- A thorough inspection of the wiring harness and connectors related to the control module, as well as checking for any visible damage, can help diagnose the issue.

4. Can OBDII code P16F0 GMC be repaired without professional help?

- Repairing this code may require expertise due to the complexity of the control module and wiring system. It is recommended to consult a qualified mechanic for accurate diagnosis and repair.

5. Are there any temporary fixes for OBDII code P16F0 GMC?

- Temporary fixes such as clearing the code using an OBDII scanner may make the warning light disappear, but the underlying issue will still need to be addressed for a permanent solution.

6. Is it safe to continue driving with OBDII code P16F0 GMC present?

- It is not recommended to drive with this code present, as it can lead to further damage to the vehicle's transmission system if not addressed promptly.

7. How much does it cost to repair OBDII code P16F0 GMC?

- The cost of repairing this code can vary depending on the extent of the damage and the specific components that need to be replaced. It is advisable to get a quote from a professional mechanic.

8. Can a faulty battery cause OBDII code P16F0 GMC to appear?

- While a faulty battery can sometimes cause communication issues with the control module, it is not a common cause for this specific OBDII code.

9. Will disconnecting the battery reset OBDII code P16F0 GMC?

- Disconnecting the battery may reset the code temporarily, but if the underlying issue is not fixed, the code is likely to reappear once the vehicle is driven again.

10. How long does it take to repair OBDII code P16F0 GMC?

- The repair time for this code can vary depending on the complexity of the issue and the availability of parts. It is best to consult with a professional mechanic for a more accurate estimate.