AutoCodes – Infiniti – P1448 Infiniti

P1448 Infiniti Code - EVAP Canister Vent Control Valve Open

Quick Answer

The EVAP canister vent control valve is located on the EVAP canister and is used to seal the canister vent. Common causes include EVAP canister vent control valve, EVAP canister is saturated with water, EVAP control system pressure sensor and the circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1448 Infiniti indicates EVAP Canister Vent Control Valve Open.
Common causes
Common causes include EVAP canister vent control valve, EVAP canister is saturated with water, EVAP control system pressure sensor and the circuit.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 22,892
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 22, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1448 Infiniti Description

The EVAP canister vent control valve is located on the EVAP canister and is used to seal the canister vent.
This solenoid valve responds to signals from the Engine Control Module (ECM). When the ECM sends an ON signal, the coil in the solenoid valve is energized. A plunger will then move to seal the canister vent. The ability to seal the vent is necessary for the on board diagnosis of other evaporative emission control system components.
This solenoid valve is used only for diagnosis, and usually, remains opened. When the vent is closed, under normal purge conditions, the evaporative emission control system is depressurized and allows EVAP Control System (Small Leak)diagnosis.
OBDII Code P1448 Infiniti - EVAP Canister Vent Control Valve Open - AutoCodes.com
P1448 Infiniti Code - EVAP Canister Vent Control Valve Open

What are the Possible Causes of the DTC P1448 Infiniti?

  • EVAP canister vent control valve
  • EVAP canister is saturated with water
  • EVAP control system pressure sensor and the circuit
  • Blocked rubber tube to EVAP canister vent control valve
  • Water separator

How to Fix the DTC P1448 Infiniti?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1448 Infiniti code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1448 Infiniti code?

Need more information on how to fix the P1448 Infiniti code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1448 Infiniti code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1448 Infiniti Code

1. What are the common symptoms of OBDII code P1448 in an Infiniti related to the EVAP Canister Vent Control Valve being open?

The common symptoms include the Check Engine Light illuminating on the dashboard, decreased fuel efficiency, and potential difficulties starting the vehicle.

2. What are the possible causes of OBDII code P1448 in an Infiniti?

The possible causes include a faulty EVAP Canister Vent Control Valve, a damaged or disconnected vacuum hose, issues with the EVAP canister itself, or a problem with the electrical circuit related to the valve.

3. How serious is OBDII code P1448 in an Infiniti?

While this code may not cause immediate harm to the vehicle, it can lead to increased emissions, reduced fuel efficiency, and may prevent the car from passing emissions tests in some areas.

4. Can I continue driving my Infiniti with OBDII code P1448 present?

It is generally safe to drive the vehicle with this code, but it is recommended to have it diagnosed and repaired as soon as possible to prevent further issues and ensure optimal performance.

5. How can I diagnose OBDII code P1448 in my Infiniti?

Diagnosis typically involves using an OBDII scanner to retrieve the code, inspecting the EVAP system components for any visible damage or leaks, and testing the EVAP Canister Vent Control Valve for proper functionality.

6. Is it possible to repair OBDII code P1448 in an Infiniti by myself?

Depending on your mechanical skills and access to tools, you may be able to replace the EVAP Canister Vent Control Valve or address any visible issues with the hoses or canister. However, for more complex electrical or diagnostic tasks, it is advisable to seek professional help.

7. How much does it cost to repair OBDII code P1448 in an Infiniti?

The cost of repair can vary depending on the root cause of the issue, the model of the Infiniti, and labor rates in your area. It is recommended to obtain quotes from different mechanics or dealerships to compare prices.

8. Can OBDII code P1448 in an Infiniti reset itself?

In some cases, the Check Engine Light may reset after several drive cycles if the issue is resolved. However, it is recommended to diagnose and repair the root cause of the code to prevent it from reoccurring.

9. Are there any preventive measures to avoid OBDII code P1448 in an Infiniti?

Regular maintenance, such as ensuring the EVAP system is inspected during scheduled services, can help prevent issues leading to this code. Additionally, avoiding rough driving or off-road conditions may reduce the likelihood of damage to EVAP components.

10. How long does it take to repair OBDII code P1448 in an Infiniti?

The repair time can vary depending on the specific issue causing the code and the availability of parts. Simple repairs like replacing a valve or hose may take a few hours, while more complex diagnostics and repairs could take longer.

Discuss the causes and fixes for P1448 Infiniti OBDII Code

  • I can'tpass the smog mcheck for this codes. p0430, P0455, P1448. I do not know if they related or not ? I have been under the car on thedriver side trying to find the Evap canister vent control valve but for some reasen I can't find it. It is for Infiniti I30 t , 2001,

  • P0455 and P1448 are related to the EAP system, but the P0430 is for the catalytic converter.

    P0430 INFINITI - Catalyst System Efficiency Below Threshold Bank 2
    Read more: https://www.autocodes.com/p...

    P0455 INFINITI - EVAP Control System Gross Leak Detected
    Read more: https://www.autocodes.com/p...

    Here is the location of the canister. Driver side rear.

    Image

    Click here to enlarge image

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play