P1337 Honda Code - Crankshaft Position Sensor 2 No Signal
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1337 Honda indicates Crankshaft Position Sensor 2 No Signal.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1337 Honda Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P1337 Honda?
- Faulty Crankshaft Position Sensor
- Crankshaft Position Sensor harness is open or shorted
- Crankshaft Position Sensor circuit poor electrical connection
How to Fix the DTC P1337 Honda?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1337 Honda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1337 Honda code?
Need more information on how to fix the P1337 Honda code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1337 Honda code diagnosed by a professional: Find a repair shop in your area
Information for Specific Honda Models
- P1337 1996 Honda Civic — Crankshaft Position Sensor No Signal
- P1337 1997 Honda Civic — Crankshaft Position Sensor No Signal
- P1337 1998 Honda Civic — Crankshaft Position Sensor No Signal
- P1337 1999 Honda Civic — Crankshaft Position Sensor No Signal
- P1337 2000 Honda Civic — Crankshaft Position Sensor No Signal
Frequently Asked Questions about P1337 Honda Code
1. What are the common symptoms of OBDII code P1337 in a Honda related to the Crankshaft Position Sensor 2 No Signal?
The common symptoms include engine stalling, difficulty starting the engine, rough idling, and a decrease in overall engine performance.
2. What are the possible causes of the OBDII code P1337 in a Honda indicating a Crankshaft Position Sensor 2 No Signal?
Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors related to the sensor, or issues with the sensor's alignment or installation.
3. How can I diagnose the OBDII code P1337 in my Honda related to the Crankshaft Position Sensor 2 No Signal?
Diagnosis typically involves using an OBDII scanner to read the code, inspecting the crankshaft position sensor and its wiring for damage, and testing the sensor's signal using a multimeter.
4. Can I drive my Honda with the OBDII code P1337 indicating a Crankshaft Position Sensor 2 No Signal?
It is not recommended to drive the vehicle with this code present, as it can lead to further engine problems and potential safety hazards. It's best to address the issue promptly.
5. How do I repair the OBDII code P1337 in a Honda related to the Crankshaft Position Sensor 2 No Signal?
Repair typically involves replacing the faulty crankshaft position sensor, repairing any damaged wiring or connectors, and ensuring proper alignment and installation of the new sensor.
6. Is it possible to reset the OBDII code P1337 in a Honda indicating a Crankshaft Position Sensor 2 No Signal?
Resetting the code using an OBDII scanner may temporarily clear the code, but it is crucial to address the underlying issue causing the code to prevent it from reoccurring.
7. Can a DIY enthusiast fix the OBDII code P1337 in a Honda related to the Crankshaft Position Sensor 2 No Signal?
Depending on their skill level, a DIY enthusiast may be able to replace the crankshaft position sensor themselves. However, it's recommended to consult a professional if unsure.
8. How much does it cost to repair the OBDII code P1337 in a Honda indicating a Crankshaft Position Sensor 2 No Signal?
The cost of repair can vary depending on the labor rates in your area, the cost of parts, and whether you choose to do the repair yourself or take it to a mechanic.
9. Will the OBDII code P1337 in a Honda cause permanent damage if left unaddressed?
Continuing to drive the vehicle with this code present can potentially cause further damage to the engine or related components, so it's essential to address the issue promptly.
10. How long does it typically take to repair the OBDII code P1337 related to the Crankshaft Position Sensor 2 No Signal in a Honda?
The repair process can vary in time depending on factors such as the accessibility of the sensor, the extent of any wiring damage, and whether you are doing the repair yourself or taking it to a mechanic.
Discuss the causes and fixes for P1337 Honda OBDII Code
Code P1337 Honda comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
