P1337 1997 Honda Civic Code - Crankshaft Position Sensor No Signal
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1337 1997 Honda Civic indicates Crankshaft Position Sensor No Signal.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1337 1997 Honda Civic Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P1337 1997 Honda Civic?
- Faulty Crankshaft Position Sensor
- Crankshaft Position Sensor harness is open or shorted
- Crankshaft Position Sensor circuit poor electrical connection
How to Fix the DTC P1337 1997 Honda Civic?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1337 1997 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1337 1997 Honda Civic code?
Need more information on how to fix the P1337 1997 Honda Civic code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1337 1997 Honda Civic code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1337 1997 Honda Civic Code
1. What are the common symptoms of OBDII code P1337 in a 1997 Honda Civic?
- Common symptoms include rough engine idle, engine stalling, difficulty starting the vehicle, and a noticeable decrease in engine performance.
2. What does the OBDII code P1337 on a 1997 Honda Civic indicate?
- OBDII code P1337 indicates a "Crankshaft Position Sensor No Signal" error on a 1997 Honda Civic.
3. What are the possible causes of OBDII code P1337 in a 1997 Honda Civic?
- Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors related to the sensor, or issues with the engine's timing system.
4. How can I diagnose the cause of OBDII code P1337 in my 1997 Honda Civic?
- To diagnose the issue, you can start by checking the wiring and connectors related to the crankshaft position sensor, testing the sensor's functionality, and inspecting the engine's timing components.
5. Is it safe to drive my 1997 Honda Civic with OBDII code P1337 active?
- It is not recommended to drive the vehicle with OBDII code P1337 active as it can lead to engine performance issues and potential stalling, which may result in safety hazards.
6. Can I repair OBDII code P1337 in my 1997 Honda Civic myself?
- Depending on your mechanical skills, you may be able to repair OBDII code P1337 by replacing the faulty crankshaft position sensor or repairing any damaged wiring or connectors. However, professional diagnosis and repair are recommended for accurate troubleshooting.
7. How much does it cost to repair OBDII code P1337 in a 1997 Honda Civic?
- The cost of repairing OBDII code P1337 can vary depending on the cause of the issue. Replacing a faulty crankshaft position sensor can range from $50 to $200, while addressing wiring or timing system issues may incur additional costs.
8. Will resetting the OBDII code P1337 in my 1997 Honda Civic make it go away permanently?
- Resetting the OBDII code P1337 may temporarily clear the error code, but if the underlying issue such as a faulty sensor or wiring problem persists, the code is likely to reappear.
9. Can a bad crankshaft position sensor cause other OBDII codes to appear in a 1997 Honda Civic?
- Yes, a malfunctioning crankshaft position sensor can cause other related codes to appear, such as misfire codes or camshaft position sensor codes due to the impact on engine timing and performance.
10. How long does it typically take to repair OBDII code P1337 in a 1997 Honda Civic?
- The repair time for OBDII code P1337 can vary depending on the extent of the issue and the availability of parts. On average, it may take a few hours to a full day for diagnosis and repair by a qualified mechanic.
Discuss the causes and fixes for P1337 1997 Honda Civic OBDII Code
Code P1337 1997 Honda Civic comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
