P1298 Code - Electric Load Detector Circuit High Voltage
Quick Answer
The Electric Load Detector (ELD) measures the main current flow and sends that signal to the Engine Control Module (ECM) to command the alternator charging system to get fuel efficiency and decrease the drag of the engine when starting. Common causes include Faulty Electronic Load Detector Unit, Faulty Engine Control Module (ECM), Electronic Load Detector Unit harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1298 indicates Electric Load Detector Circuit High Voltage.
- Common causes
- Common causes include Faulty Electronic Load Detector Unit, Faulty Engine Control Module (ECM), Electronic Load Detector Unit harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1298 Description
What are the Possible Causes of the DTC P1298?
- Faulty Electronic Load Detector Unit
- Faulty Engine Control Module (ECM)
- Electronic Load Detector Unit harness is open or shorted
- Electronic Load Detector Unit circuit poor electrical connection
How to Fix the DTC P1298?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1298 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1298 code?
Need more information on how to fix the P1298 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1298 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P1298 Acura — Electric Load Detector Circuit High Voltage
- P1298 Chrysler — Air/Fuel Ratio Lean Under Wide Open Throttle Condition
- P1298 Dodge — Air/Fuel Ratio Lean Under Wide Open Throttle Condition
- P1298 Ford — IDM Failure
- P1298 Honda — Electric Load Detector Circuit High Voltage
- P1298 Isuzu — Electric Load Detector Circuit High Voltage
Frequently Asked Questions about P1298 Code
No Frequently Asked Questions about P1298 Code found.
Discuss the causes and fixes for P1298 OBDII Code
-
My honda insight 2010 has an error code P1298 and it's give a message Electronic Load Detector high voltage.so how can I fix it and where is the location of that ELD?
-
ELD Replacement
1. Remove the under-dash fuse/relay box
2. Remove the fuse
3. Remove the joint bar (B)
Click here to enlarge image4. Turn over the under-dash fuse/relay box, then remove the ELD (A).
Click here to enlarge imageP1298 HONDA - Electric Load Detector Circuit High Voltage
Read more: https://www.autocodes.com/p...
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
