P11EE Code - Throttle/Pedal Positio Sensor/Switch 'E' Circuit Voltage Low
Quick Answer
The accelerator pedal position is monitored separately by 2 individual sensors. Common causes include Faulty Accelerator Pedal, Accelerator Pedal harness is open or shorted, Accelerator Pedal circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P11EE indicates Throttle/Pedal Positio Sensor/Switch 'E' Circuit Voltage Low.
- Common causes
- Common causes include Faulty Accelerator Pedal, Accelerator Pedal harness is open or shorted, Accelerator Pedal circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P11EE Description
Each change in the accelerator-pedal position is transmitted to the engine-management control unit with a maximum lag of 50 milliseconds. Sensor signals are transmitted in analog form. The engine-management control unit monitors the two input signals from the sensors and compares them for plausibility (factors such as mutual synchronicity, linearity, etc.).
The Digital Motor Electronics (DME) diagnosis the voltage at the Accelerator Pedal Module Pedal Sensor 2. The Diagnostic Trouble Code (DTC) is detected whenever the voltage at pedal sensor 2 becomes less than a lower limit value times 0.5. Lower limit value: 0.39 V.
What are the Possible Causes of the DTC P11EE?
- Faulty Accelerator Pedal
- Accelerator Pedal harness is open or shorted
- Accelerator Pedal circuit poor electrical connection
- Faulty Accelerator Pedal Module
How to Fix the DTC P11EE?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P11EE code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P11EE code?
Need more information on how to fix the P11EE code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P11EE code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P11EE BMW — Throttle/Pedal Positio Sensor/Switch 'E' Circuit Voltage Low
- P11EE MINI — Throttle/Pedal Positio Sensor/Switch 'E' Circuit Voltage Low
Frequently Asked Questions about P11EE Code
1. What are the common symptoms of OBDII code P11EE?
- Common symptoms of OBDII code P11EE include poor engine performance, stalling, rough idle, and decreased fuel efficiency.
2. What are the possible causes of OBDII code P11EE?
- Possible causes of OBDII code P11EE include a faulty throttle/pedal position sensor or switch, wiring issues, a malfunctioning throttle body, or a problem with the vehicle's ECM.
3. How can I diagnose OBDII code P11EE?
- Diagnosing OBDII code P11EE involves using a scan tool to retrieve the code, inspecting the throttle/pedal position sensor and related wiring, and performing voltage tests to identify the issue.
4. Can I still drive my vehicle with OBDII code P11EE present?
- It is not recommended to drive your vehicle with OBDII code P11EE present, as it can lead to further engine damage and potential safety hazards.
5. How can I repair OBDII code P11EE?
- Repairing OBDII code P11EE may involve replacing the throttle/pedal position sensor, repairing damaged wiring, cleaning the throttle body, or reprogramming the ECM.
6. Is it possible to reset OBDII code P11EE without repairs?
- While clearing the code with a scan tool may temporarily turn off the check engine light, the underlying issue causing OBDII code P11EE will persist until properly diagnosed and repaired.
7. Can a DIY enthusiast fix OBDII code P11EE?
- DIY enthusiasts with automotive repair experience and the necessary tools can attempt to fix OBDII code P11EE, but it is recommended to seek professional assistance for accurate diagnosis and repair.
8. How much does it cost to repair OBDII code P11EE?
- The cost of repairing OBDII code P11EE can vary depending on the specific cause of the issue, parts needed, and labor costs. It is advisable to obtain quotes from reputable auto repair shops.
9. Will OBDII code P11EE cause my vehicle to fail an emissions test?
- Yes, OBDII code P11EE can cause a vehicle to fail an emissions test due to increased emissions and improper engine performance.
10. How often does OBDII code P11EE occur in vehicles?
- OBDII code P11EE is not as common as some other codes, but it can still occur in vehicles with throttle/pedal position sensor or circuitry issues.
Discuss the causes and fixes for P11EE OBDII Code
Code P11EE comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
