P1137 NISSAN - Swirl Control Valve Control Position Sensor Circuit
P1137 NISSAN Possible Causes
- Faulty Swirl Control Valve Control Position Sensor
- Swirl Control Valve Control Position Sensor harness is open or shorted
- Swirl Control Valve Control Position Sensor circuit poor electrical connection
- Faulty Swirl Control Valve
First diagnose P1137 NISSAN code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P1137 NISSAN code
Labor: 1.0The cost of diagnosing the P1137 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the P1137 NISSAN code detected?An excessively low or high voltage from the sensor is sent to Engine Control Module (ECM).
P1137 NISSAN Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1137 Nissan DescriptionSwirl control valve position sensor is installed on the intake manifold.
The sensor is connected to the front end of the valve shaft of the swirl control valve.
The sensor responds to the valve shaft movement. This sensor is a kind of potentiometer which transforms the swirl control valve position into output voltage, and emits the voltage signal to the Engine Control Module (ECM).
P1137 NISSAN More InformationNeed more information on how to fix the P1137 NISSAN code?
Get Access to Factory Service Manuals
P1137 Nissan Information for specific Nissan models
Need more help?Get the P1137 Nissan code diagnosed by a professional: Find a repair shop in your area
P1137 NISSAN CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1137 Nissan code? Have you replaced any parts?
Any information is appreciated. Thanks