AutoCodes - OBDII Code List - P1136 NISSAN

P1136 NISSAN - Intake Valve Timing Control Solenoid Valve Circuit Bank 2

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3
Table of contents

P1136 NISSAN Possible Causes

  • Faulty Intake Valve Timing Control Solenoid Bank 2
  • Intake Valve Timing Control Solenoid Bank 2 harness is open or shorted
  • Intake Valve Timing Control Solenoid Bank 2 circuit poor electrical connection

How do I fix code P1136 NISSAN?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
How much do you know about cars?

Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge

Play Now

Tech Notes

Since the Intake valve timing control solenoid valve uses oil flow to control timing, dirty oil can cause the valve to stuck open or close. Before replacing the valve, change the engine oil and filter and reset the engine code. If the code comes back you can remove the Intake valve timing control solenoid and clean it with brake cleaner.

Cost of diagnosing the P1136 NISSAN code

Labor: 1.0

The cost of diagnosing the P1136 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Possible engine lack/loss of power
  • Possible engine rough idle

P1136 NISSAN Description

The intake valve timing control solenoid valve is activated by ON/OFF pulse duty (ratio) signals from the Engine Control Module (ECM). The intake valve timing control solenoid valve changes the oil amount and direction of flow through the intake valve timing control unit or stops oil flow.
The longer pulse width advances the valve angle. The shorter pulse width retards the valve angle.
When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position.
The Diagnostic Trouble Code (DTC) when an improper voltage is sent to the ECM through the intake valve timing control solenoid valve.
OBDII Code P1136 Nissan - Intake Valve Timing Control Solenoid Valve Circuit Bank 2 - AutoCodes.com

More Information

Need more information on how to fix the P1136 NISSAN code?
Get Access to Factory Service Manuals

Information for specific Nissan models

Need more help?

Get the P1136 Nissan code diagnosed by a professional: Find a repair shop in your area

Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1136 Nissan code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
 
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 2
 
1=Easy 2=Moderate 3=Hard What is this?