P0C8A GMC Code - Hybrid/EV Battery Temperature Sensor 9 Circuit Low Voltage
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0C8A GMC indicates Hybrid/EV Battery Temperature Sensor 9 Circuit Low Voltage.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0C8A GMC Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the hybrid battery temperature sensor is greater than 160°C (320°F).
What are the Possible Causes of the DTC P0C8A GMC?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0C8A GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0C8A GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0C8A GMC code?
Need more information on how to fix the P0C8A GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0C8A GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P0C8A 2014 GMC Sierra — Hybrid/EV Battery Temperature Sensor 9 Circuit Low Voltage
- P0C8A 2015 GMC Sierra — Hybrid/EV Battery Temperature Sensor 9 Circuit Low Voltage
- P0C8A 2016 GMC Sierra — Hybrid/EV Battery Temperature Sensor 9 Circuit Low Voltage
- P0C8A 2017 GMC Sierra — Hybrid/EV Battery Temperature Sensor 9 Circuit Low Voltage
- P0C8A 2018 GMC Sierra — Hybrid/EV Battery Temperature Sensor 9 Circuit Low Voltage
Frequently Asked Questions about P0C8A GMC Code
What does the OBDII code P0C8A mean on a GMC vehicle?
The P0C8A code indicates a low voltage issue in the circuit for Hybrid/EV Battery Temperature Sensor 9, which monitors the temperature of the battery pack in a GMC hybrid or electric vehicle.
What are the common symptoms of the P0C8A code?
Symptoms may include the illumination of the check engine light, reduced hybrid or EV performance, limited battery charging/discharging, or the vehicle entering a fail-safe mode.
What causes the P0C8A code to appear?
Common causes include a faulty battery temperature sensor, damaged or corroded wiring in the sensor circuit, a poor electrical connection, or, less commonly, a malfunction in the hybrid/EV battery control module.
Can I drive my GMC vehicle with the P0C8A code active?
It is not recommended, as the vehicle may experience reduced performance or fail-safe operation, and continued driving could lead to further damage to the hybrid/EV battery system.
How do you diagnose the P0C8A code?
A technician will typically use a scan tool to confirm the code, visually inspect the wiring and connectors for damage, test the temperature sensor for proper resistance, and check the battery control module for faults.
What repairs are typically needed to fix the P0C8A code?
Repairs may involve replacing the faulty battery temperature sensor, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the hybrid/EV battery control module if necessary.
How much does it cost to repair the P0C8A code?
Repair costs vary depending on the specific issue, but replacing a battery temperature sensor typically costs $200–$500, while wiring repairs or control module replacements may cost more.
Can a low or high ambient temperature cause the P0C8A code?
While extreme temperatures can stress the battery system, the P0C8A code is specifically related to a low voltage issue in the temperature sensor circuit, not directly caused by ambient temperature.
How can I prevent the P0C8A code from occurring?
Regular maintenance, such as inspecting and cleaning battery system wiring and connectors, and addressing hybrid/EV issues promptly, can help prevent this code from appearing.
Does fixing the P0C8A code require special tools?
Yes, diagnosing and repairing this code often requires advanced diagnostic tools, such as an OBDII scanner with hybrid/EV system capabilities and a multimeter, as well as specialized knowledge of hybrid/EV systems.
Discuss the causes and fixes for P0C8A GMC OBDII Code
Code P0C8A GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
