P0C8A 2014 GMC Sierra Code - Hybrid/EV Battery Temperature Sensor 9 Circuit Low Voltage
Quick Answer
Hybrid/EV Battery Temperature Sensors are used to monitor the battery temperature. Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0C8A 2014 GMC Sierra indicates Hybrid/EV Battery Temperature Sensor 9 Circuit Low Voltage.
- Common causes
- Common causes include Faulty Hybrid/EV Battery Assembly, Hybrid/EV Battery Assembly harness is open or shorted, Hybrid/EV Battery Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0C8A 2014 GMC Sierra Description
Each Hybrid/EV Battery Interface Control Module communicates the temperature sensor values to the Hybrid/EV Powertrain Control Module via serial data.
The Hybrid/EV Powertrain Control Module uses the battery temperature sensors to determine the Hybrid/EV Battery Module temperature in order to control the battery cooling system operation.
The Diagnostic Trouble Code (DTC) will be set when the hybrid battery temperature sensor is greater than 160°C (320°F).
What are the Possible Causes of the DTC P0C8A 2014 GMC Sierra?
- Faulty Hybrid/EV Battery Assembly
- Hybrid/EV Battery Assembly harness is open or shorted
- Hybrid/EV Battery Assembly circuit poor electrical connection
- Faulty Hybrid/EV Battery Interface Control Module
How to Fix the DTC P0C8A 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0C8A 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0C8A 2014 GMC Sierra code?
Need more information on how to fix the P0C8A 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0C8A 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0C8A 2014 GMC Sierra Code
1. What does the OBDII code P0C8A mean on a 2014 GMC Sierra?
The P0C8A code indicates a "Hybrid/EV Battery Temperature Sensor 9 Circuit Low Voltage," meaning the sensor is reporting unusually low voltage readings.
2. What are the symptoms of code P0C8A in a 2014 GMC Sierra?
Symptoms may include reduced hybrid system performance, warning lights on the dashboard, poor fuel efficiency, or limited electric mode operation.
3. What causes the P0C8A code to appear?
Common causes include a faulty battery temperature sensor, damaged wiring or connectors, or issues with the hybrid battery control module.
4. Can I drive my 2014 GMC Sierra with the P0C8A code?
Driving may be possible, but it’s not recommended as it could lead to further damage to the hybrid battery system or reduced performance.
5. How is the P0C8A code diagnosed?
Diagnosis often involves using a scan tool to check for additional codes, inspecting the wiring and connectors, and testing the temperature sensor for proper operation.
6. How do you fix the P0C8A code on a 2014 GMC Sierra?
Repairs may include replacing the faulty temperature sensor, repairing or replacing damaged wiring, or reprogramming the hybrid battery control module.
7. How much does it cost to fix the P0C8A code?
The repair cost can vary but typically ranges from $150 to $500 depending on the severity of the issue and labor costs.
8. Can a weak hybrid battery cause the P0C8A code?
Yes, a degraded hybrid battery could potentially cause voltage irregularities and trigger this code.
9. Does the P0C8A code affect fuel efficiency?
Yes, this code can reduce efficiency as the hybrid system may not function optimally.
10. Can a software update fix the P0C8A code?
In some cases, updating the hybrid battery control module’s software might resolve issues associated with this code.
Discuss the causes and fixes for P0C8A 2014 GMC Sierra OBDII Code
Code P0C8A 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
