P0962 HONDA - Pressure Control Solenoid 'A' Control Circuit Low
P0962 HONDA Possible Causes
- Faulty Clutch Pressure Control Solenoid Valve 'A'
- Clutch Pressure Control Solenoid Valve 'A' harness is open or shorted
- Clutch Pressure Control Solenoid Valve 'A' circuit poor electrical connection
How do I fix code P0962 HONDA?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
User Submitted Video
Cost of diagnosing the P0962 HONDA code
Labor: 1.0The cost of diagnosing the P0962 HONDA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
P0962 HONDA DescriptionA/T clutch pressure control solenoid valve A is used for clutch pressure control. A spool in A/T clutch pressure control solenoid valve A pushes the valve according to the duty cycle that is controlled by the Powertrain Control Module (PCM) (The hydraulic pressure is proportional to the current). The PCM measures the current flowing through A/T clutch pressure control solenoid valve A, and uses feedback control to compensate for the difference between the actual current and the commanded one. If the measured current for the PCM output duty cycle is not within a specified range (open or short), the PCM detects a malfunction and stores a Diagnostic Trouble Code (DTC).
More InformationNeed more information on how to fix the P0962 HONDA code?
Get Access to Factory Service Manuals
Need more help?Get the P0962 Honda code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0962 Honda code? Have you replaced any parts?
Any information is appreciated. Thanks