AutoCodes – Honda – P0962 2016 Honda CR-V

P0962 2016 Honda CR-V Code - CVT Drive Pulley Pressure Control Valve Circuit Low

Quick Answer

The Continuously Variable Transmission (CVT) drive pulley pressure control solenoid valve controls hydraulic pressure to the drive pulley. Common causes include Faulty CVT Drive Pulley Pressure Control Solenoid Valve, CVT Drive Pulley Pressure Control Solenoid Valve harness is open or shorted, CVT Drive Pulley Pressure Control Solenoid Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0962 2016 Honda CR-V indicates CVT Drive Pulley Pressure Control Valve Circuit Low.
Common causes: Common causes include Faulty CVT Drive Pulley Pressure Control Solenoid Valve, CVT Drive Pulley Pressure Control Solenoid Valve harness is open or shorted, CVT Drive Pulley Pressure Control Solenoid Valve circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 586

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 30, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0962 2016 Honda CR-V Description

The Continuously Variable Transmission (CVT) drive pulley pressure control solenoid valve controls hydraulic pressure to the drive pulley. The CVT drive pulley pressure control solenoid valve is controlled by duty cycle output. The spool in the CVT drive pulley pressure control solenoid valve moves the valve according to the current and produces hydraulic pressure in proportion to the current. The Powertrain Control Module (PCM) measures the current that passes through the CVT drive pulley pressure control solenoid valve and uses feedback control to compensate for the difference between the measured current and the commanded one. If the measured current is not equal to the duty cycle command, the PCM detects a malfunction (open, short to ground) and stores a Diagnostic Trouble Code (DTC).

OBDII Code P0962 2016 Honda CR-V - CVT Drive Pulley Pressure Control Valve Circuit Low - AutoCodes.com — P0962 2016 Honda CR-V Code - CVT Drive Pulley Pressure Control Valve Circuit Low

What does this mean?

What are the Possible Causes of the DTC P0962 2016 Honda CR-V?

Faulty CVT Drive Pulley Pressure Control Solenoid Valve
CVT Drive Pulley Pressure Control Solenoid Valve harness is open or shorted
CVT Drive Pulley Pressure Control Solenoid Valve circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0962 2016 Honda CR-V?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0962 2016 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0962 2016 Honda CR-V code?

Need more information on how to fix the P0962 2016 Honda CR-V code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0962 2016 Honda CR-V code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0962 2016 Honda CR-V Code

1. What are the common symptoms of OBDII code P0962 on a 2016 Honda CR-V?

- Common symptoms include rough shifting, transmission slippage, decreased fuel efficiency, and the transmission going into limp mode.

2. What does the OBDII code P0962 on a 2016 Honda CR-V indicate?

- The code P0962 indicates an issue with the CVT Drive Pulley Pressure Control Valve Circuit being too low.

3. What are the possible causes of OBDII code P0962 on a 2016 Honda CR-V?

- Possible causes include a faulty pressure control solenoid, damaged wiring or connectors in the circuit, low transmission fluid, or internal transmission problems.

4. How can I diagnose the cause of OBDII code P0962 on my 2016 Honda CR-V?

- Diagnosis involves checking the transmission fluid level and condition, inspecting the wiring and connectors for damage, and testing the pressure control solenoid for proper function.

5. Can I continue to drive my 2016 Honda CR-V with OBDII code P0962 present?

- It is not recommended to continue driving with this code active as it can lead to further transmission damage and potentially unsafe driving conditions.

6. How can I repair OBDII code P0962 on my 2016 Honda CR-V?

- Repair may involve replacing the pressure control solenoid, repairing damaged wiring or connectors, ensuring proper transmission fluid levels, or seeking professional help for internal transmission issues.

7. Is it possible to reset the OBDII code P0962 on a 2016 Honda CR-V without repairing the issue?

- While clearing the code may temporarily turn off the warning light, the underlying issue causing the code will persist until properly addressed.

8. Are there any preventive maintenance tips to avoid OBDII code P0962 on a 2016 Honda CR-V?

- Regularly checking and maintaining proper transmission fluid levels and quality, as well as addressing any transmission issues promptly, can help prevent the occurrence of this code.

9. How long does it typically take to repair OBDII code P0962 on a 2016 Honda CR-V?

- The repair time can vary depending on the cause of the issue, but it may take a few hours to a day for diagnosis and repair by a skilled technician.

10. Can a DIY enthusiast with basic automotive knowledge fix OBDII code P0962 on a 2016 Honda CR-V?

- While basic troubleshooting like checking connections and fluid levels can be done, diagnosing and repairing the exact cause of the code may require specialized tools and expertise, so professional assistance is recommended.