AutoCodes – Nissan – P0734 Nissan

P0734 Nissan Code - 4th. Gear Malfunction

Quick Answer

This diagnosis monitors actual gear position by checking the torque converter slip ratio calculated by Transmission Control Module (TCM) as follows: Torque converter slip ratio = A x C/B A: Output shaft revolution signal from revolution sensor B: Engine speed signal from Engine Control Module (ECM) C: Gear ratio determined as gear position which TCM supposes If the actual gear position is higher than the position (4th) supposed by TCM, the slip ratio will be more than normal. Common causes include Low transmission fluid level, Dirty transmission fluid, Shift solenoids. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0734 Nissan indicates 4th. Gear Malfunction.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Shift solenoids.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 30,639

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 29, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0734 Nissan Description

This diagnosis monitors actual gear position by checking the torque converter slip ratio calculated by Transmission Control Module (TCM) as follows:
Torque converter slip ratio = A x C/B
A: Output shaft revolution signal from revolution sensor
B: Engine speed signal from Engine Control Module (ECM)
C: Gear ratio determined as gear position which TCM supposes
If the actual gear position is higher than the position (4th) supposed by TCM, the slip ratio will be more than normal. In case the ratio exceeds the specified value, TCM judges this diagnosis malfunction.

OBDII Code P0734 Nissan - 4th. Gear Malfunction - AutoCodes.com — P0734 Nissan Code - 4th. Gear Malfunction

What does this mean?

What are the Possible Causes of the DTC P0734 Nissan?

Low transmission fluid level
Dirty transmission fluid
Shift solenoids
Transmission mechanical problems
Transmission hydraulic control circuit

How to Fix the DTC P0734 Nissan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Start by inspecting the transmission fluid level and condition, and change fluid if necessary.

There is a Nissan service bulletin for the following models:
2002 Nissan Sentra
2002 Nissan Altima
2002 Nissan Sentra and Altima Factory Service Bulletin OBDII Code P0734

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0734 Nissan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0734 Nissan code?

Need more information on how to fix the P0734 Nissan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0734 Nissan code diagnosed by a professional: Find a repair shop in your area

Information for Specific Nissan Models

P0734 2002 Nissan Altima Sedan — 4th. Gear Malfunction
P0734 2003 Nissan Altima Sedan — 4th. Gear Malfunction
P0734 2004 Nissan Altima Sedan — 4th. Gear Malfunction
P0734 2005 Nissan Altima Sedan — 4th. Gear Malfunction
P0734 2006 Nissan Altima Sedan — 4th. Gear Malfunction

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.