P0734 2005 Nissan Altima Sedan Code - 4th. Gear Malfunction
Quick Answer
This diagnosis monitors actual gear position by checking the torque converter slip ratio calculated by Transmission Control Module (TCM) as follows: Torque converter slip ratio = A x C/B A: Output shaft revolution signal from revolution sensor B: Engine speed signal from Engine Control Module (ECM) C: Gear ratio determined as gear position which TCM supposes If the actual gear position is higher than the position (4th) supposed by TCM, the slip ratio will be more than normal. Common causes include Low transmission fluid level, Dirty transmission fluid, Shift solenoids. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0734 2005 Nissan Altima Sedan indicates 4th. Gear Malfunction.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Shift solenoids.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0734 2005 Nissan Altima Sedan Description
Torque converter slip ratio = A x C/B
A: Output shaft revolution signal from revolution sensor
B: Engine speed signal from Engine Control Module (ECM)
C: Gear ratio determined as gear position which TCM supposes
If the actual gear position is higher than the position (4th) supposed by TCM, the slip ratio will be more than normal. In case the ratio exceeds the specified value, TCM judges this diagnosis malfunction.
What are the Possible Causes of the DTC P0734 2005 Nissan Altima Sedan?
- Low transmission fluid level
- Dirty transmission fluid
- Shift solenoids
- Transmission mechanical problems
- Transmission hydraulic control circuit
How to Fix the DTC P0734 2005 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0734 2005 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0734 2005 Nissan Altima Sedan code?
Need more information on how to fix the P0734 2005 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0734 2005 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0734 2005 Nissan Altima Sedan Code
1. What does the OBDII code P0734 mean for a 2005 Nissan Altima Sedan?
P0734 indicates a "4th Gear Ratio Incorrect" error, meaning the transmission control module has detected an issue with the 4th gear's performance or ratio.
2. What are the common symptoms of P0734 in a 2005 Nissan Altima?
Symptoms may include difficulty shifting into 4th gear, slipping in 4th gear, abnormal RPM fluctuations, reduced fuel efficiency, and the check engine light being illuminated.
3. What causes the P0734 code in a 2005 Nissan Altima?
Common causes include low or dirty transmission fluid, a faulty shift solenoid, worn clutch components, internal transmission damage, or issues with the transmission control module (TCM).
4. Can driving with a P0734 code damage my 2005 Nissan Altima?
Yes, driving with a P0734 code can cause further damage to the transmission if the issue is not addressed promptly, especially if the transmission is slipping or overheating.
5. How do I diagnose P0734 in my 2005 Nissan Altima?
Start by checking the transmission fluid level and condition, then use a scan tool to monitor transmission data. Inspect the shift solenoids, wiring, and connectors, and perform a pressure test if needed.
6. How can low transmission fluid cause a P0734 code?
Low transmission fluid can lead to insufficient hydraulic pressure, preventing the transmission from properly engaging or maintaining 4th gear.
7. What repairs might fix the P0734 code in a 2005 Nissan Altima?
Repairs may include replacing the transmission fluid, repairing or replacing shift solenoids, fixing wiring issues, or rebuilding the transmission if internal damage is found.
8. How much does it cost to fix a P0734 code on a 2005 Nissan Altima?
Costs vary widely depending on the cause. Simple fixes like replacing fluid might cost $100-$200, while major repairs like a transmission rebuild could exceed $2,000.
9. Can a faulty TCM cause the P0734 code?
Yes, a malfunctioning transmission control module can provide incorrect signals to the transmission, causing improper gear engagement and triggering the P0734 code.
10. Can I clear the P0734 code without fixing the issue?
While you can clear the code with a scan tool, it will likely return if the underlying problem is not resolved. Addressing the root cause is necessary to prevent further issues.
Discuss the causes and fixes for P0734 2005 Nissan Altima Sedan OBDII Code
Code P0734 2005 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
