AutoCodesNissan – P0550 Nissan

P0550 Nissan Code - Power Steering Pressure Sensor Circuit Malfunction

Quick Answer

Power steering pressure (PSP) sensor is installed to the power steering high-pressure tube and detects a power steering load. Common causes include Faulty Power Steering Pressure Sensor, Power Steering Pressure Sensor harness is open or shorted, Power Steering Pressure Sensor circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0550 Nissan indicates Power Steering Pressure Sensor Circuit Malfunction.
Common causes
Common causes include Faulty Power Steering Pressure Sensor, Power Steering Pressure Sensor harness is open or shorted, Power Steering Pressure Sensor circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 90,334
How popular is this code, among other codes? Medium
Table of contents Created and updated by William Orellana on Jun 14, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0550 Nissan Description

Power steering pressure (PSP) sensor is installed to the power steering high-pressure tube and detects a power steering load. This sensor is a potentiometer which transforms the power steering load into output voltage, and emits the voltage signal to the Engine Control Module (ECM). The ECM controls the electric throttle control actuator and adjusts the throttle valve opening angle to increase the engine speed and adjusts the idle speed for the increased load.
OBDII Code P0550 Nissan - Power Steering Pressure Sensor Circuit Malfunction - AutoCodes.com
P0550 Nissan Code - Power Steering Pressure Sensor Circuit Malfunction

What are the Possible Causes of the DTC P0550 Nissan?

  • Faulty Power Steering Pressure Sensor
  • Power Steering Pressure Sensor harness is open or shorted
  • Power Steering Pressure Sensor circuit poor electrical connection

How to Fix the DTC P0550 Nissan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0550 Nissan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0550 Nissan code?

Need more information on how to fix the P0550 Nissan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0550 Nissan code diagnosed by a professional: Find a repair shop in your area

Information for Specific Nissan Models

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0550 Nissan Code

No Frequently Asked Questions about P0550 Nissan Code found.

Discuss the causes and fixes for P0550 Nissan OBDII Code

  • my 2005 Nissan quest  have three trouble code P0113-P0183-P0550- I already replace whole Fuel Pump for P0183 (built in fuel temp sensor), And replace Mass airflow sensor for P0113. But it,s still showing three code as it is. Three code are related with harness and connecters problem. So Problem is some where else. Because of It,s not possible all Three sensors have lose connections or bad connecters. what is a ECM problem ? , Any body Help me plz.

  • ECM = Engine Control Module.

    The ECM could be the problem, but it's very unlikely. You should follow the wires from the items you replaced and check the connector and grounds.

    Download the "Engine Control" section of the service manual from here: http://x.nissanhelp.com/for...

    The download it's free you just need to register.

  • My experience say, (may i am wrong) , My Van need to replace ECM , because every sensor is not gonna show same kind of problem, voltage high input .What i can use  used same ECM ?. If i buy used same model/years ECM, what i need reprogram it ?. any shorter way ?.

  • What model and year is your Nissan? some models and year don't need to the key reprogram to the new ECM.

  •  my 2005 Nissan quest  have three trouble code P0113-P0183- I
    already replace whole Fuel Pump for P0183 (built in fuel temp sensor),
    And replace Mass airflow sensor for P0113. But it,s still showing two
    code as it is. Three code are related with harness and connecters
    problem. So Problem is some where else. Because of It,s not possible all
    Two sensors have lose connections or bad connecters. what is a ECM
    problem ? , Any body Help me plz. Read more: https://www.autocodes.com/p05...

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play