AutoCodes
 
OBDII Code List
 
P0446 TOYOTA

P0446 TOYOTA - EVAP System Vent Control Circuit

Repair Importance Level: 1/3
Repair Difficulty Level: 3/3   
Comments  |  Add Comment

P0446 TOYOTA Possible Causes

  • Missing Fuel cap
  • Incorrect fuel filler cap used
  • Fuel filler cap remains open or fails to close
  • Foreign matter caught in fuel filler cap
  • Vent control valve harness is open or shorted
  • Vent control valve circuit poor electrical connection
  • Faulty vent control valve

First diagnose P0446 TOYOTA code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

P0446 TOYOTA Tech Notes

There are factory service bulletin for the following Toyota models:

Toyota RAV4
Toyota Tercel
Toyota Paseo
Toyota Camry
Toyota Avalon
Toyota Tacoma
Toyota 4Runner
Toyota T-100
Toyota Factory Service Bulletin OBDII Code P0446

2003 – 2004 Toyota Corolla
2003 – 2005 Toyota Matrix
Toyota Factory Service Bulletin OBDII Code P0446 Corolla and Matrix

If P0446 is combine with P0440 and P0441 use this bulletin:
2000-2003 Toyota Solara
2000-2003 Toyota Avalon
2000-2003 Toyota Camry
2001-2003 Toyota Sienna
Toyota Factory Service Bulletin OBDII Code P0446 Solara, Avalon, Camry, Sienna

If only P0446 is present:
2001-2003 Toyota Sienna
Toyota Sienna Factory Service Bulletin OBDII Code P0446

Toyota P0441, P0446 EVAP Diagnostics and Vacuum Switching Valve Testing Video




User submitted video

Cost of diagnosing the P0446 TOYOTA code

    Labor: 1.0

    The cost of diagnosing the P0446 TOYOTA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

When is the P0446 TOYOTA code detected?

The P0446 codes triggered when an improper voltage signal is sent to Engine Control Module (ECM) through EVAP canister vent control valve.

P0446 TOYOTA Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Possible a noticeable fuel odor caused by the release of fuel vapors

P0446 Toyota Description

The Evaporative System (EVAP) canister vent control valve is located on the EVAP canister and is used to seal the canister vent.
This solenoid valve responds to signals from the Engine Control Module (ECM). When the ECM sends an ON signal, the coil in the solenoid valve is energized. A plunger will then move to seal the canister vent. The ability to seal the vent is necessary for the on board diagnosis of other evaporative emission control system components.
This solenoid valve is used only for diagnosis, and usually remains opened.
OBDII Code P0446 Toyota - EVAP System Vent Control Circuit - AutoCodes.com

P0446 TOYOTA More Information

Need more information on how to fix the P0446 TOYOTA code?
Get Access to Factory Service Manuals

Need more help?

Get the P0446 Toyota code diagnosed by a professional: Find a repair shop in your area

Related Information

P0446 TOYOTA Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0446 Toyota code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧