P0406 Nissan Code - Exhaust Gas Recirculation Temperature Sensor Circuit High Input
Quick Answer
Early Exhaust Gas Recirculation (EGR) systems component s include and EGR Valve, and Engine Control Μodule (ECΜ) Controlled Vacuum Switch Valve or EGR Solenoid and an EGR Vacuum Μodulator. Common causes include Faulty EGR volume control solenoid valve, Carbon built up on EGR valve, EGR volume control solenoid valve harness is open or shorted. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0406 Nissan indicates Exhaust Gas Recirculation Temperature Sensor Circuit High Input.
- Common causes
- Common causes include Faulty EGR volume control solenoid valve, Carbon built up on EGR valve, EGR volume control solenoid valve harness is open or shorted.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0406 Nissan Description
The EGR system on recently built vehicles uses a step motor to control the flow rate of EGR from exhaust manifold. This motor has four winding phases. It operates according to the output pulse signal of the ECΜ. Two windings are turned ON and OFF in sequence. Each time an ON pulse is issued, the valve opens or closes, changing the flow rate. When no change in the flow rate is needed, the ECΜ does not issue the pulse signal. Α certain voltage signal is issued so that the valve remains at that particular opening.
What are the Possible Causes of the DTC P0406 Nissan?
- Faulty EGR volume control solenoid valve
- Carbon built up on EGR valve
- EGR volume control solenoid valve harness is open or shorted
- EGR volume control solenoid valve circuit poor electrical connection
- Faulty EGR temperature sensor and circuit
How to Fix the DTC P0406 Nissan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0406 Nissan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0406 Nissan code?
Need more information on how to fix the P0406 Nissan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0406 Nissan code diagnosed by a professional: Find a repair shop in your area
Information for Specific Nissan Models
- P0406 2004 Nissan Maxima — Exhaust Gas Recirculation Temperature Sensor Circuit High Input
- P0406 2005 Nissan Maxima — Exhaust Gas Recirculation Temperature Sensor Circuit High Input
- P0406 2006 Nissan Maxima — Exhaust Gas Recirculation Temperature Sensor Circuit High Input
- P0406 2002 Nissan Sentra — Exhaust Gas Recirculation Temperature Sensor Circuit High Input
Frequently Asked Questions about P0406 Nissan Code
No Frequently Asked Questions about P0406 Nissan Code found.
Discuss the causes and fixes for P0406 Nissan OBDII Code
Code P0406 Nissan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
