P0406 2004 Nissan Maxima Code - Exhaust Gas Recirculation Temperature Sensor Circuit High Input
Quick Answer
Early Exhaust Gas Recirculation (EGR) systems component s include and EGR Valve, and Engine Control Μodule (ECΜ) Controlled Vacuum Switch Valve or EGR Solenoid and an EGR Vacuum Μodulator. Common causes include Faulty EGR volume control solenoid valve, Carbon built up on EGR valve, EGR volume control solenoid valve harness is open or shorted. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0406 2004 Nissan Maxima indicates Exhaust Gas Recirculation Temperature Sensor Circuit High Input.
- Common causes
- Common causes include Faulty EGR volume control solenoid valve, Carbon built up on EGR valve, EGR volume control solenoid valve harness is open or shorted.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0406 2004 Nissan Maxima Description
The EGR system on recently built vehicles uses a step motor to control the flow rate of EGR from exhaust manifold. This motor has four winding phases. It operates according to the output pulse signal of the ECΜ. Two windings are turned ON and OFF in sequence. Each time an ON pulse is issued, the valve opens or closes, changing the flow rate. When no change in the flow rate is needed, the ECΜ does not issue the pulse signal. Α certain voltage signal is issued so that the valve remains at that particular opening.
What are the Possible Causes of the DTC P0406 2004 Nissan Maxima?
- Faulty EGR volume control solenoid valve
- Carbon built up on EGR valve
- EGR volume control solenoid valve harness is open or shorted
- EGR volume control solenoid valve circuit poor electrical connection
- Faulty EGR temperature sensor and circuit
How to Fix the DTC P0406 2004 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0406 2004 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0406 2004 Nissan Maxima code?
Need more information on how to fix the P0406 2004 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0406 2004 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0406 2004 Nissan Maxima Code
1. What are the common symptoms of OBDII code P0406 on a 2004 Nissan Maxima?
- Common symptoms include the Check Engine light illuminating, poor engine performance, rough idling, and potential stalling.
2. What does the OBDII code P0406 indicate on a 2004 Nissan Maxima?
- The code P0406 indicates a high input signal from the Exhaust Gas Recirculation (EGR) temperature sensor circuit.
3. What are the possible causes of OBDII code P0406 on a 2004 Nissan Maxima?
- Possible causes include a faulty EGR temperature sensor, damaged wiring or connectors in the sensor circuit, or a problem with the EGR system itself.
4. How can I diagnose the OBDII code P0406 on my 2004 Nissan Maxima?
- Diagnosis involves checking the EGR temperature sensor and its circuit for proper operation, as well as inspecting the EGR valve and related components for any issues.
5. Can I still drive my 2004 Nissan Maxima with OBDII code P0406?
- It is not recommended to drive the vehicle with the code P0406 present, as it can lead to decreased fuel efficiency and potential damage to the engine over time.
6. How can I repair OBDII code P0406 on my 2004 Nissan Maxima?
- Repair typically involves replacing the faulty EGR temperature sensor, repairing any damaged wiring or connectors, and ensuring the EGR system is functioning correctly.
7. Will resetting the Check Engine light fix OBDII code P0406 on a 2004 Nissan Maxima?
- Resetting the light may temporarily turn it off, but the underlying issue causing the code will still need to be diagnosed and repaired to prevent it from reoccurring.
8. Are there any DIY tips for addressing OBDII code P0406 on a 2004 Nissan Maxima?
- DIY tips include checking for loose or damaged wiring around the EGR temperature sensor, ensuring proper connections, and cleaning the EGR system components.
9. How much does it typically cost to repair OBDII code P0406 on a 2004 Nissan Maxima?
- The cost of repair can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.
10. Can a mechanic easily fix OBDII code P0406 on a 2004 Nissan Maxima?
- A qualified mechanic should be able to diagnose and repair OBDII code P0406 efficiently by following the proper diagnostic procedures and utilizing the necessary tools and expertise.
Discuss the causes and fixes for P0406 2004 Nissan Maxima OBDII Code
Code P0406 2004 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
