P0336 1999 Honda Civic Code - Crankshaft Position Sensor 'A' Circuit Range/Performance
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0336 1999 Honda Civic indicates Crankshaft Position Sensor 'A' Circuit Range/Performance.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0336 1999 Honda Civic Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P0336 1999 Honda Civic?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0336 1999 Honda Civic?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0336 1999 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0336 1999 Honda Civic code?
Need more information on how to fix the P0336 1999 Honda Civic code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0336 1999 Honda Civic code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0336 1999 Honda Civic Code
1. What does OBDII code P0336 mean on a 1999 Honda Civic?
Code P0336 indicates that the Engine Control Module (ECM) has detected a problem with the signal from the Crankshaft Position Sensor 'A' either being out of range or having performance issues.
2. What are common symptoms of code P0336 in a 1999 Honda Civic?
Common symptoms include engine stalling or misfiring, difficulty starting the engine, reduced fuel efficiency, and possibly the engine failing to start at all. The check engine light will also be illuminated.
3. What can cause the P0336 code to appear in a 1999 Honda Civic?
Causes can include a faulty crankshaft position sensor, damaged wiring or connectors associated with the sensor, issues with the reluctor ring (part of the crankshaft that provides the sensor signal), or a malfunctioning ECM.
4. How can I fix the P0336 code in a 1999 Honda Civic?
Repair strategies include checking and, if necessary, replacing the crankshaft position sensor, repairing any damaged wiring or connectors, inspecting the reluctor ring for damage, and checking the ECM for faults. Always ensure connections are clean and secure.
5. Is it safe to drive my 1999 Honda Civic with code P0336?
It is not recommended to drive with this code active as it can lead to engine performance issues that might cause the vehicle to stall or stop unexpectedly, which can be dangerous.
6. How do I diagnose the P0336 code on my 1999 Honda Civic?
Diagnosis should start with scanning the ECM for codes and assessing the crankshaft position sensor and its circuit. Checking for visible signs of damage to wiring and testing the sensor's resistance and signal output can help pinpoint the issue.
7. What tools are required to diagnose and repair code P0336 on a 1999 Honda Civic?
Tools needed may include a digital multimeter, an OBDII scanner, basic hand tools, and possibly an oscilloscope to check the sensor's waveform output.
8. Could a bad battery or alternator cause the P0336 code in a 1999 Honda Civic?
While a bad battery or alternator can cause various engine issues, they are unlikely to directly cause a P0336 code. This code specifically relates to performance issues or incorrect signals from the crankshaft position sensor.
9. What is the cost to fix the P0336 code in a 1999 Honda Civic?
Costs can vary widely but generally include the price of the crankshaft position sensor (if replacement is needed), which can range from $50 to $150, plus labor costs which can depend on the vehicle’s condition and location. Total repair costs can range from $150 to $300.
10. How urgent is it to address the P0336 code in a 1999 Honda Civic?
Addressing code P0336 is fairly urgent to prevent potential engine damage or unsafe driving conditions due to engine stalling or poor vehicle performance.
Discuss the causes and fixes for P0336 1999 Honda Civic OBDII Code
Code P0336 1999 Honda Civic comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
