P011E Ford Code - Engine Coolant Temperature 1 / Ambient Air Temperature Correlation
Quick Answer
The Engine Coolant Temperature (ECT) Sensor is a thermistor device in which resistance changes with temperature. Common causes include Biased Engine Coolant Temperature (ECT) or Ambient Air Temperature (AAT) Sensor, Faulty Engine Coolant Temperature Sensor, Faulty Intake Air Temperature (IAT Sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P011E Ford indicates Engine Coolant Temperature 1 / Ambient Air Temperature Correlation.
- Common causes
- Common causes include Biased Engine Coolant Temperature (ECT) or Ambient Air Temperature (AAT) Sensor, Faulty Engine Coolant Temperature Sensor, Faulty Intake Air Temperature (IAT Sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P011E Ford Description
Thermistor-type sensors are considered passive sensors. A passive sensor is connected to a voltage divider network so varying the resistance of the passive sensor causes a variation in total current flow. The voltage that is dropped across a fixed resistor (pull-up resister) in series with the sensor resistor determines the voltage signal at the PCM. This voltage signal is equal to the reference voltage minus the voltage drop across the fixed resistor.
The ECT Sensor is located in an engine coolant passage and measures the engine coolant temperature. The PCM uses the engine coolant temperature input for fuel control and for cooling fan control. The ECT Sensor can be a threaded or twist lock type.
This Diagnostic Trouble Code (DTC) is set when the ECT and Ambient Air Temperature (AAT) sensor readings differ by greater than a calibrated value.
What are the Possible Causes of the DTC P011E Ford?
- Biased Engine Coolant Temperature (ECT) or Ambient Air Temperature (AAT) Sensor
- Faulty Engine Coolant Temperature Sensor
- Faulty Intake Air Temperature (IAT Sensor
How to Fix the DTC P011E Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P011E Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P011E Ford code?
Need more information on how to fix the P011E Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P011E Ford code diagnosed by a professional: Find a repair shop in your area
Information for Specific Ford Models
- P011E 2015 Ford F150 — Engine Coolant Temperature 1 / Ambient Air Temperature Correlation
- P011E 2016 Ford F150 — Engine Coolant Temperature 1 / Ambient Air Temperature Correlation
- P011E 2017 Ford F150 — Engine Coolant Temperature 1 / Ambient Air Temperature Correlation
- P011E 2018 Ford F150 — Engine Coolant Temperature 1 / Ambient Air Temperature Correlation
- P011E 2019 Ford F150 — Engine Coolant Temperature 1 / Ambient Air Temperature Correlation
- P011E 2020 Ford F150 — Engine Coolant Temperature 1 / Ambient Air Temperature Correlation
Frequently Asked Questions about P011E Ford Code
What does OBD-II code P011E mean for a Ford vehicle?
Code P011E indicates a discrepancy between the engine coolant temperature (ECT) sensor and the ambient air temperature (AAT) sensor readings, suggesting an issue with their correlation.
What are common symptoms of code P011E in Ford vehicles?
Common symptoms include the check engine light turning on, poor fuel efficiency, difficulty starting the engine, and erratic temperature gauge readings.
What causes the P011E code in Ford vehicles?
Causes can include a faulty engine coolant temperature sensor, a malfunctioning ambient air temperature sensor, wiring issues, corrosion in connectors, or incorrect sensor calibration.
Can driving with code P011E damage my Ford vehicle?
Driving with this code may lead to improper engine performance or excessive fuel consumption, but immediate catastrophic damage is unlikely if the vehicle is otherwise operating normally.
How do I diagnose the P011E code?
Start by inspecting the ECT and AAT sensors for damage or corrosion, check wiring and connectors, and use a multimeter or scan tool to compare sensor readings.
How do I fix code P011E in a Ford vehicle?
Repairs may involve replacing a faulty ECT or AAT sensor, repairing damaged wiring, cleaning corroded connectors, or updating the vehicle’s software if necessary.
Can I reset the P011E code without making repairs?
While you can clear the code using an OBD-II scanner, it will likely return if the underlying issue is not resolved.
Does code P011E affect fuel economy?
Yes, this code can negatively impact fuel economy, as incorrect temperature readings may lead to improper air-fuel mixture adjustments.
How much does it cost to repair code P011E?
The cost varies depending on the issue. Replacing a sensor can cost $50-$200, while wiring repairs or diagnostics may add to labor costs.
What tools do I need to troubleshoot code P011E?
Tools required include an OBD-II scanner, a multimeter for electrical testing, and basic hand tools for sensor removal and wiring inspection.
Discuss the causes and fixes for P011E Ford OBDII Code
Code P011E Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
