P011E 2019 Ford F150 Code - Engine Coolant Temperature 1 / Ambient Air Temperature Correlation
Quick Answer
The Engine Coolant Temperature (ECT) Sensor is a thermistor device in which resistance changes with temperature. Common causes include Biased Engine Coolant Temperature (ECT) or Ambient Air Temperature (AAT) Sensor, Faulty Engine Coolant Temperature Sensor, Faulty Intake Air Temperature (IAT Sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P011E 2019 Ford F150 indicates Engine Coolant Temperature 1 / Ambient Air Temperature Correlation.
- Common causes
- Common causes include Biased Engine Coolant Temperature (ECT) or Ambient Air Temperature (AAT) Sensor, Faulty Engine Coolant Temperature Sensor, Faulty Intake Air Temperature (IAT Sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P011E 2019 Ford F150 Description
Thermistor-type sensors are considered passive sensors. A passive sensor is connected to a voltage divider network so varying the resistance of the passive sensor causes a variation in total current flow. The voltage that is dropped across a fixed resistor (pull-up resister) in series with the sensor resistor determines the voltage signal at the PCM. This voltage signal is equal to the reference voltage minus the voltage drop across the fixed resistor.
The ECT Sensor is located in an engine coolant passage and measures the engine coolant temperature. The PCM uses the engine coolant temperature input for fuel control and for cooling fan control. The ECT Sensor can be a threaded or twist lock type.
This Diagnostic Trouble Code (DTC) is set when the ECT and Ambient Air Temperature (AAT) sensor readings differ by greater than a calibrated value.
What are the Possible Causes of the DTC P011E 2019 Ford F150?
- Biased Engine Coolant Temperature (ECT) or Ambient Air Temperature (AAT) Sensor
- Faulty Engine Coolant Temperature Sensor
- Faulty Intake Air Temperature (IAT Sensor
How to Fix the DTC P011E 2019 Ford F150?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P011E 2019 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P011E 2019 Ford F150 code?
Need more information on how to fix the P011E 2019 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P011E 2019 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P011E 2019 Ford F150 Code
1. What are the common symptoms of OBDII code P011E in a 2019 Ford F150?
- Common symptoms include poor engine performance, decreased fuel efficiency, and potential issues with the heating and cooling systems.
2. What can cause the OBDII code P011E to trigger in a 2019 Ford F150?
- This code is typically triggered when there is a correlation error between the engine coolant temperature sensor 1 and the ambient air temperature sensor.
3. How can I diagnose the cause of OBDII code P011E in my 2019 Ford F150?
- To diagnose the issue, you may need to inspect the engine coolant temperature sensor, ambient air temperature sensor, and their wiring for any damage or malfunction.
4. What are some possible repair tips for resolving OBDII code P011E in a 2019 Ford F150?
- Repair tips may include replacing the faulty engine coolant temperature sensor or ambient air temperature sensor, checking and repairing any damaged wiring, and resetting the fault codes.
5. Can OBDII code P011E in a 2019 Ford F150 cause any long-term damage if left unresolved?
- Ignoring this code may lead to potential issues with the engine's performance and efficiency, so it's advisable to address the problem promptly to prevent further damage.
6. Are there any safety concerns associated with OBDII code P011E in a 2019 Ford F150?
- While this code may not pose an immediate safety risk, it can affect the overall reliability and performance of your vehicle, so it's important to address it to ensure safe operation.
7. How much does it typically cost to repair OBDII code P011E in a 2019 Ford F150?
- The cost of repairs can vary depending on the extent of the issue, but it may involve replacing sensors, repairing wiring, and resetting fault codes, which can range from moderate to expensive.
8. Can I still drive my 2019 Ford F150 with OBDII code P011E present?
- It's generally not recommended to drive with unresolved OBDII codes, as they can impact the vehicle's performance and fuel efficiency. It's best to address the issue before driving extensively.
9. Is it possible to reset OBDII code P011E in a 2019 Ford F150 without repairs?
- While you can reset the code using an OBDII scanner, it's crucial to investigate and address the underlying cause to prevent the issue from reoccurring.
10. How often does OBDII code P011E occur in a 2019 Ford F150?
- The occurrence of this code can vary, but it's not an uncommon issue, especially in vehicles with sensor-related problems or wiring issues. Regular maintenance can help prevent such issues.
Discuss the causes and fixes for P011E 2019 Ford F150 OBDII Code
Code P011E 2019 Ford F150 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
